Hotpoint RB536 Installation of the range, Before You Begin, Tools You Will Need, Ordinances

Models: RB525 RB632 RB536 RB526 RB533

1 40
Download 40 pages 50.55 Kb
Page 27
Image 27
Installation of the range.

Installation of the range.

Read these instructions completely and carefully.

Before You Begin

IMPORTANT: Save these instructions for the local electrical inspector’s use.

IMPORTANT: OBSERVE ALL GOVERNING CODES AND

ORDINANCES.

NOTE TO INSTALLER: Leave these instructions with the appliance after installation is completed.

NOTE TO CONSUMER: Keep this Owner’s Manual and

Installation Instructions for future use.

NOTE: This appliance must be properly grounded.

Tools You Will Need

Large blade screwdriver

1/4″ hex head nutdriver

Channel lock pliers or small ratchet wrench with 3/16″ socket (for leveling range)

Electrical Requirements

CAUTION, FOR PERSONAL SAFETY: DO NOT USE AN

EXTENSION CORD WITH THIS APPLIANCE.

REMOVE HOUSE FUSE OR OPEN CIRCUIT BREAKER

BEFORE BEGINNING INSTALLATION.

This appliance must be supplied with the proper voltage and frequency, and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or time delay fuse, as noted on the rating plate.

Wiring must conform to National Electric Codes.

If the electric service provided does not meet the above specifications, have a licensed electrician install an approved outlet.

Because range terminals are not accessible after range is in position, flexible service conduit or cord must be used.

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service

27

Page 27
Image 27
Hotpoint RB536 Installation of the range, Before You Begin, Tools You Will Need, Electrical Requirements, Ordinances