Hanns.G HB171 user manual Adjusting the Viewing Angle

Page 10

User’s Manual

ADJUSTING THE VIEWING ANGLE

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.

Hold the stand so you do not topple the monitor when you change the monitor’s angle.

You are able to adjust the monitor’s angle from 0° to 20°.

Figure.3. Monitor Angle

NOTES:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Be careful not to place fingers or hands near the hinges when tilting the monitor, otherwise pinching can result.

10

Image 10
Contents Inch Wide Screen TFT LCD Monitor User’s Manual CanadaRecycling Information Table of Contents Safety Notice Special Notes on LCD Monitors Checking the Contents of the Package Before YOU Operate the MonitorInstallation Instructions Connecting to a PC Adjusting the Viewing Angle Operating Instructions Control Panel ButtonsAdjust Menu / EnterFunction Description Function OSDOther Setting Plug & Play DDC2B Feature Technical Support FAQ Problem & Question Possible SolutionCable not Connected Mode Resolution Horizontal VerticalInput not Support Appendix