Hanns.G HB171 user manual Special Notes on LCD Monitors

Page 6

User’s Manual

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.

If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or service center for repair. Do not attempt to repair the monitor yourself.

Lamp Disposal

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.

6

Image 6
Contents Inch Wide Screen TFT LCD Monitor User’s Manual CanadaRecycling Information Table of Contents Safety Notice Special Notes on LCD Monitors Checking the Contents of the Package Before YOU Operate the MonitorInstallation Instructions Connecting to a PC Adjusting the Viewing Angle Operating Instructions Control Panel ButtonsAdjust Menu / EnterFunction Description Function OSDOther Setting Plug & Play DDC2B Feature Technical Support FAQ Problem & Question Possible SolutionMode Resolution Horizontal Vertical Cable not ConnectedInput not Support Appendix