Brinkmann 2400 owner manual PRE-START Check List

Page 10

6.Check each place listed (A–H) for growing bubbles which indicates a leak.

7.Turn off gas supply at cylinder valve.

8.Turn on control knobs to release gas pressure in hose.

9.Turn control knobs to "OFF" position.

10.Tighten any leaking connections.

11.Repeat soapy water test until no leaks are detected.

12.Turn off gas supply at cylinder valve until you are ready to use your grill.

13.Wash off soapy residue with cold water and towel dry.

14.Wait 5 minutes to allow all gas to evacuate the area before lighting grill.

CAUTION! DO NOT use the grill if leaks cannot be stopped. Contact a qualified gas appliance repair service.

NOTE: The leak test must be performed in an area that has adequate lighting in order to see if bubbles are developing. DO NOT use a flashlight to check for bubbles.

WARNING

PRE-START CHECK LIST:

Property damage, bodily harm, severe burns, and death could result from failure to follow these safety steps. These steps should be performed after the grill has been assembled and prior to each use. DO NOT operate this grill until you have read and understand ALL of the warnings and instructions in this manual.

PRE-START CHECK LIST:

•Ensure that the grill is properly assembled.

•Inspect the gas supply hose for burns, chaffing, kinks, and proper routing before each use. If it is evident there is excessive abrasion or wear, or the hose is cut, it must be replaced prior the grill being used. Replace with hose and regulator, Model No. 155-2400-0, which can be obtained by contacting customer service at 800-527-0717.

•Leak check all gas connections and hose. See section on "Leak Testing".

•Ensure that all electrical supply cords are properly grounded. Keep any electrical supply cord and the fuel supply hose away from any heated surfaces. Hose should be at least 3 inches from hot surfaces.

•Position your grill on level ground in a well ventilated location, a safe distance from combustible materials, buildings and overhangs.

•Properly place the empty grease tray under the grease drain hole in the bottom of the grill to catch grease during use.

•DO NOT obstruct the flow of combustion and ventilation air.

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Heavy-Duty Gas Grill Important Safety Table of Contents Page Installation Information LP GAS Cylinder not Supplied with this GrillCylinder Specifications Filling the LP GAS Cylinder Installing the LP GAS Cylinder Onto the GrillRegulator Resetting Procedure Hose and RegulatorConnecting Hose and Regulator to AN LP GAS Cylinder When to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Breaking in Your Grill Turning OFF the GrillOperating the Grill Preheating the GrillIndirect Cooking To Minimize FLARE-UPSRotisserie Cooking Grilling to Proper Temperature CleanlinessHelpful Hints Cleaning and Maintenance Burner ASSEMBLY/MAINTENANCETransporting and Storage Cooking GrillsHeat Distribution Plates Before Storing Your GrillTrouble Shooting Frequently Asked Questions Frequently Asked Questions Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts BAG Contents Step Hubcap Tank Heat Shield Plate Place grease cup in middle of hole in heat shield plate Grill Body Assembly Step Hose Warming Rack Cooking Grills Heat Distributon Plates Brackets Igniter Cap Battery ProSeries 2400 Assembled Warranty

2400 specifications

The Brinkmann 2400 is a versatile and efficient product designed for contemporary outdoor grilling enthusiasts. Renowned for its durability and performance, this grill balances functionality with user-friendly features to elevate any outdoor cooking experience.

One of the standout characteristics of the Brinkmann 2400 is its robust construction. Built from high-quality stainless steel, the grill is designed to withstand the rigors of outdoor use while maintaining an attractive appearance. The materials used ensure resistance to rust and corrosion, thereby extending the lifespan of the grill.

The Brinkmann 2400 boasts a spacious cooking area that allows users to prepare meals for large gatherings. With its multi-burner design, this grill increases cooking efficiency, allowing different dishes to be cooked simultaneously at various temperature settings. The main grilling surface is complemented by a warming rack that keeps food hot without overcooking, perfect for large cookouts or family dinners.

Advanced technologies integrated into the Brinkmann 2400 make it a leader in the market. The grill features an electronic ignition system, ensuring a quick and hassle-free start-up. The heat distribution is optimized through precision-engineered burners that guarantee even cooking across the entire surface. Moreover, the adjustable airflow control allows users to manage cooking temperatures meticulously, accommodating diverse grilling techniques from searing to slow-roasting.

Another notable feature is the grill's portability. The Brinkmann 2400 is designed with foldable side shelves, making it compact and easy to store when not in use. This portability is further enhanced by sturdy wheels that allow for smooth movement, whether it’s placed on a patio or taken on a camping trip.

The user experience with the Brinkmann 2400 is enhanced by additional attributes such as built-in temperature gauges, which allow for precise monitoring without having to lift the lid frequently. The grill also includes ample storage space for grilling essentials, which keeps items organized and within reach.

Overall, the Brinkmann 2400 represents a perfect blend of innovation, quality, and user-centered design, making it an ideal choice for both novice and experienced grill masters looking to impress their guests with delicious and flavorful meals.
Top Page Image Contents