Brinkmann 2400 owner manual Igniter Cap Battery

Page 30

Step 18

Remove igniter cap and insert battery with positive end of battery toward igniter cap. Replace igniter cap and make sure the igniter is working properly.

Step 19

Attach the loop strap bracket onto the base panel using two M6 X 12mm bolts.

Igniter Cap Battery

Image 30

Contents Heavy-Duty Gas Grill Important Safety Table of Contents Page Installation Information LP GAS Cylinder not Supplied with this GrillCylinder Specifications Filling the LP GAS Cylinder Installing the LP GAS Cylinder Onto the GrillRegulator Resetting Procedure Hose and RegulatorConnecting Hose and Regulator to AN LP GAS Cylinder Leak Testing When to Perform a Leak TestChecking for Leaks PRE-START Check List Lighting Instructions Lighting the Main BurnersMatch Lighting the Main Burners Breaking in Your Grill Turning OFF the GrillOperating the Grill Preheating the GrillTo Minimize FLARE-UPS Indirect CookingRotisserie Cooking Cleanliness Grilling to Proper TemperatureHelpful Hints Cleaning and Maintenance Burner ASSEMBLY/MAINTENANCETransporting and Storage Cooking GrillsHeat Distribution Plates Before Storing Your GrillTrouble Shooting Frequently Asked Questions Frequently Asked Questions Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts BAG Contents Step Hubcap Tank Heat Shield Plate Place grease cup in middle of hole in heat shield plate Grill Body Assembly Step Hose Warming Rack Cooking Grills Heat Distributon Plates Brackets Igniter Cap Battery ProSeries 2400 Assembled Warranty