Brinkmann 6330 owner manual Igniter Cap Battery

Page 32

Step 24

Place the porcelain coated heat distribution plates on lower level of grill body assembly directly above burners.

Step 25

Place porcelain cast iron cooking grills on support ribs directly above porcelain coated heat distribution plates.

Step 26

Place warming rack in grooves so that it sits above the cooking grills.

Step 27

Remove igniter cap and insert battery with positive end of battery toward igniter cap. Replace igniter cap and make sure the igniter is working properly.

Warming Rack

Cooking Grills

Heat

Distribution

Plates

Grooves

6330

Igniter Cap Battery

31

Image 32

Contents Heavy-Duty Gas Grill Important Safety Table of Contents General Warnings Installation Information LP GAS Cylinder not Supplied with this GrillCylinder Specifications Installing the LP GAS Cylinder Onto the Grill Regulator Resetting ProcedureFilling the LP GAS Cylinder Hose and RegulatorConnecting Hose and Regulator to AN LP GAS Cylinder Connecting Hose and RegulatorChecking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Main Burners Lighting InstructionsLighting the Main Burners Turning OFF the Grill Lighting the Side BurnerMatch Lighting the Side Burner Operating the Grill Breaking in Your GrillPreheating the Grill Controlling FLARE-UPSRotisserie Cooking Side BurnerHelpful Hints CleanlinessGrilling to Proper Temperature Cleaning and Maintenance Burner ASSEMBLY/MAINTENANCECooking Grills Heat Distribution PlatesTransporting and Storage Before Storing Your GrillTrouble Shooting Frequently Asked Questions Frequently Asked Questions Parts BAG Contents Assembly Instructions For Missing PARTS, Please Call Customer Service AT Step Step Hubcap Heat Shield Plate Tank Heat Shield Place grease cup in middle of hole in heat shield plate Grill Body Step Hose Side burner grate Igniter Cap Battery ProSeries 6330 Assembled Accessories Gallon PAN & Basket SET Warranty