Brinkmann 2250 manual Rotisserie Cooking, Side Burner

Page 15

ROTISSERIE COOKING:

Your grill was pre-drilled from factory to include mounting holes for a rotisserie (sold separately). Do not use a rotisserie not specifically manufactured for this grill.

Read and follow all instructions provided with the rotisserie. Save instructions for future reference.

Do not use the side burner when using a rotisserie.

WARNING

When using an AC current rotisserie, it must be electrically grounded in accordance with local codes, or in the absence of local codes:

In the US: The National Electrical Code – ANSI-NFPA No. 70 – Latest Edition

In Canada: the Canadian Electrical Code – CSA C22.1

The Rotisserie is equipped with a three pronged plug for your protection against electrical shock. This plug should be plugged directly into a properly grounded 3 prong receptacle. Never cut or remove the grounding plug. Any extension cord must also have a 3 prong receptacle.

All electrical supply cords should be kept away from water and any hot surfaces of the grill.

USING OTHER FEATURES OF THE GRILL:

THE SIDE BURNER:

The side burner can be used to prepare side dishes such as beans, potatoes, corn, or to warm sauces.

The burner valve can be adjusted from high to low depending upon your cooking demands.

WARNING

Read instructions on lighting your grill to light the side burner.

Never close the side burner cover when the burner is lit.

Use a 10" diameter pot or smaller that does NOT have an extended handle when cooking on the side burner. Center pot over burner.

Never place more than 15 pounds on the side burner. The side burner is not constructed to hold weight exceeding 15 pounds.

Use caution to avoid bumping grill, side burner or pot to prevent pot from spilling contents possibly leading to severe burns.

DO NOT use side burner to deep fry food in oil to avoid dangers associated with oil igniting creating a very dangerous situation.

13

Image 15
Contents 2250Heavy-Duty Gas Grill Page Important Safety Table of Contents General Warnings LP GAS Cylinder not Supplied with this Grill Installation InformationCylinder Specifications Regulator Resetting Procedure Filling the LP GAS CylinderHose and Regulator Connecting Hose and Regulator Connecting Hose and Regulator to AN LP GAS CylinderLeak Testing When to Perform a Leak TestChecking for Leaks PRE-START Check List Lighting Instructions Lighting the Main BurnersMatch Lighting the Main Burners Lighting the Side Burner Match Lighting the Side BurnerTurning OFF the Grill Controlling FLARE-UPS Operating the GrillBreaking in Your Grill Preheating the GrillSide Burner Rotisserie CookingCleanliness Grilling to Proper TemperatureHelpful Hints Burner ASSEMBLY/MAINTENANCE Cleaning and MaintenanceBefore Storing Your Grill Cooking GrillsHeat Distribution Plates Transporting and StorageTrouble Shooting Frequently Asked Questions Frequently Asked Questions Parts BAG Contents Assembly Instructions For Missing PARTS, Please Call Customer Service AT Step Hubcap Tank Heat Shield Plate Place grease cup in middle of hole in heat shield plate Grill Body Assembly Hose Heat Shield Step Place side burner grate on side burner Side Burner Igniter Place warming rack in grooves above the cooking grills ProSeries 2250 Assembled Accessories Gallon PAN & Basket SET Warranty