Rear Panel AC Power Connections

TV/Monitor Video Outputs 22

[See Figure 3]

The video output of the RSP-985 is sent to your TV monitor from ei- ther an RCA-type composite video connection or an S-Video con- nection. Use the type of connection appropriate for your monitor and system.

For example, if you’ve chosen to use S-Video connections, run an S-Video cable (with mini-DIN connectors) from the RSP-985’s S- Video output to your monitor’s S-Video input.

If you have chosen a composite interface, connect the RSP-985’s RCA output jack to the matching RCA input on your television monitor.

Note: The RSP-985 cannot convert composite RCA video signals from source components to an S-Video signal to send to the TV monitor. Unless all of your video sources have S-Video connec- tions, you may decide to use RCA composite signals for ALL video connections. Alternatively, if your TV monitor has two selectable inputs, you could connect the RCA output of the RSP-985 to one input and the S-Video output to the other. This would require switching between the two inputs on the TV monitor in order to watch an RCA composite or an S-Video components. This is the only way to have a “mixed” system with some RCA composite and some S-Video sources.

Tape Monitor Audio Outputs 14

[See Figure 4]

Apair of RCA-type audio outputs send a signal to an audio record- ing device (cassette deck, DAT, or Mini-Disc recorder, etc.). The analog signal from any of your source components will be routed to these outputs for recording, depending on the selection made with the LISTENING input buttons.

Connect audio cables from the RSP-985’s TAPE MONITOR OUT jacks to your recorder’s analog inputs.

Note: Only analog input signals are routed to the TAPE MONITOR OUT jacks. If you are using a digital input, you should also connect the analog output of the source component for recording.

AC power 21

Your RSP-985 is configured at the factory for the proper AC line voltage in the country where you purchased it (115 volts/60Hz AC in the USA and 230 volts/50Hz AC in Europe). The AC line configu- ration is noted on the back of your unit.

Plug the supplied power cable into the AC receptacle on the back of the unit. Then, plug into an appropriate AC outlet.

RSP-985

AC Convenience Outlets 26

Two outlets let you plug AC cords from source components into the back of the RSP-985 so that they will be turned on and off au- tomatically. The outlets are powered whenever the RSP-985 is fully active. It is off when the RSP-985 is in STANDBY mode.

Note: We DO NOT RECOMMEND using this outlet for a power am- plifier. Do not exceed the maximum 500 watt capability of these switched outlets.

Zone 2 Connection and Operation

The RSP-985 provides a second zone capability for a separate am- plifier and pair of speakers in a remote location in your house. From the remote zone, you can select a source component (even if different from the source playing in the main listening room), ad- just the volume level in the remote zone, and (depending on the remote control you are using) operate the source components.

To take advantage of the Zone 2 capability, you will need addi- tional components: a pair of speakers installed in the remote zone and a power amplifier to drive them.

Although Zone 2 can be controlled from the RSP-985’s ON- SCREEN MENU system, operation from the second zone requires the installation of an infrared repeater system such as a Xantech, Niles, etc. This repeater system relays infrared remote control commands from a handheld remote to the REMOTE EXTENSION IN repeater input on the back of the RSP-985. Ask your authorized Rotel dealer for additional information on repeater systems and their installation.

Several points to keep in mind about the Zone 2 function:

•An infrared repeater system (Xantech, Niles, et al) should be used for Zone 2 control via the 3.5 mm REMOTE EXTENSION IN jack on the back panel

•Zone 2 is immediately active when the RSP-985 is turned on, ei- ther at a zero volume level or at the last previous volume depend- ing on the “Zone 2 Auto-Mute” setting chosen from the ON-SCREEN MENU system during initial system setup. By default, Auto-Mute is engaged, meaning that every time you turn the unit off, the volume in the remote zone is muted and must be manually raised the next time Zone 2 is used. If Auto-Mute is not engaged, the remote zone will begin playing at the previous volume the next time the RSP-985 is activated.

•The RR-939 remote control supplied with the RSP-985 will operate Zone 2 if used in conjunction with a repeater system from the re- mote zone. It can also be programmed to operate Rotel source components via the RSP-985's REMOTE EXTENSION OUT jack.

RSP-985 specifications

The Rotel RSP-985 is a high-performance audio/video processor that has gained recognition for its exceptional sound quality and advanced features. This unit is designed for audiophiles who crave an immersive home theater experience, combining innovative technology with user-friendly functionality.

One of the standout characteristics of the RSP-985 is its impressive audio processing capabilities. It is equipped with a high-performance 24-bit digital-to-analog converter (DAC), which enhances the overall sound quality by providing a dynamic range and clarity that rivals more contemporary models. The processor supports various audio formats, including Dolby Digital and DTS surround sound formats, allowing users to enjoy a cinema-like experience in the comfort of their homes.

The RSP-985 features a multi-channel configuration, offering support for up to 5.1 channels. This setup allows for true surround sound reproduction, making it ideal for movie enthusiasts and music lovers alike. The integrated equalization settings enable users to customize audio output to suit their listening environment and preferences, ensuring an optimized auditory experience.

Connectivity is another strong suit of the Rotel RSP-985. The unit provides multiple input options, including digital coaxial, optical, and analog inputs, ensuring compatibility with various audio sources such as DVD players, Blu-ray players, and gaming consoles. The processor also includes a dedicated phono input for vinyl enthusiasts, broadening its appeal for classic audio formats.

Furthermore, the RSP-985 features an intuitive user interface, making navigation through its numerous settings seamless. The unit is designed with ergonomic controls and a clear display, allowing users to easily tweak their audio settings without hassle. Remote control functionality adds convenience, enabling users to adjust settings from the comfort of their seating position.

In addition to its exceptional audio capabilities, the RSP-985 has a robust build quality synonymous with the Rotel brand. The heavy-duty chassis is engineered to minimize interference, ensuring that sound integrity is maintained even in challenging environments.

In conclusion, the Rotel RSP-985 stands out as a versatile and high-quality audio/video processor. With its impressive range of features, advanced audio technologies, and customizability options, it caters to the demands of audiophiles and home theater enthusiasts, making it a worthy consideration for anyone looking to elevate their audio experience.