On-Screen Display and System Configuration

SURROUND SOUND PROCESSOR RSP-985

•All source components connected to the RSP-985's analog audio inputs (except the TAPE MONITOR and 5.1 CHANNEL input) are available at the line level output for Zone 2. The ZONE 2 outputs are independent of the main outputs. You can select a different source or adjust Zone 2 volume without effecting the MAIN out- puts in any way.

•Avoid sending the same infrared command to the RSP-985 front panel sensor and the Zone 2 repeater at the same time. This means that Zone 2 must be in a different room from the RSP-985.

Remote External Sensor/Repeater Jacks 20

[See Figure 6]

These 3.5 mm mini-jacks allow your RSP-985 to send/receive com- mand codes from industry-standard infrared transmitters and re- ceivers via hard-wired connections. They are used in configuring your RSP-985 with the proper IR connections for Zone 2 operation.

These 3.5 mm mini-jack connections provide easy incorporation of third party infrared transmitters and repeaters (Xantech, etc.) for total control of custom installed and multi-zone systems.

Zone 2 Power On/Off Operation

With the factory default settings, the RSP-985 provides totally in- dependent power on/power off operation for both zones. Pressing the STANDBY button on the front panel or from the remote in the main room activates or deactivates the RSP-985 in the main room only and has no effect on Zone 2. Conversely, using the remote control from Zone 2 activates or deactivates Zone 2 only and has no effect on the main listening room. In other words, Zone 2 can be turned on without turning on the main room and vice versa. Each room can only be turned on or off from that room.

Note: In this default mode, you cannot deactivate the entire sys- tem from the front panel of the RSP-985. To turn off ZONE 2, you would have to go to ZONE 2 and use the remote control STANDBY button to deactivate ZONE 2 from that location. You can change this default operation by selecting the AUTO-MUTE NO selection at the SYSTEM SETUP MENU. When AUTO MUTE is disabled, the entire system (both zones) is activated or deactivated when the front panel STANDBY button is pressed. See the section on the SYSTEM SETUP MENU for details of changing this setting, either on a permanent basis or as a temporary measure to allow you to deactivate ZONE 2 from the front panel.

The REMOTE EXTENSION IN jack accepts signals from infrared repeaters located in a remote area of your home. This receptacle is required for connecting a remote sensor/transmitter to enable operation of the RSP-985’s ZONE 2 functions.

The REMOTE EXTENSION OUT jack sends signals from the RE- MOTE EXTENSION IN jack to a remote infrared repeater or to Rotel CD players, cassette decks, or tuners with a compatible rear panel remote connector.

The EXTERNAL IN JACK located above these two jacks is for use with an external IR sensor duplicating the front panel IR sensor and should not be used for ZONE 2 IR connections.

Note: ZONE 2 and its IR repeater should be in a different area from the main room. The RSP-985 should not be within range of Zone 2’s remote control to prevent IR commands intended to control Zone 2 from inadvertently controlling the main room operations.

Zone 2 Audio Outputs 15

[See Figure 6]

These variable line-level RCA-type audio outputs send the Zone 2 audio signal to a stereo power amplifier driving a pair of speakers in the remote zone.

Although you have the option of using an integrated amplifier or a receiver to power the remote speakers, we strongly suggest using

afixed-gain power amplifier. This simplifies system installation and operation. Your authorized Rotel dealer may make another recommendation based on specific system requirements.

If you are configuring your system for Zone 2 operation, connect the left and right Zone 2 outputs on the RSP-985 to the left and right channels of the amplifier powering the remote speakers, us- ing conventional RCA audio cables.

On-Screen Display and System Configuration

The RSP-985 features two on-screen systems to help operate the system. The first is a simple ONE-LINE DISPLAY that appears at the bottom of the TV screen whenever primary settings (Volume, Input, etc.) are changed. ONE-LINE DISPLAY can be turned off during the configuration of the system if you prefer.

Amore comprehensive ON-SCREEN MENU system is available at any time by pressing the ON-SCREEN button on the remote con- trol. This system includes intuitive menus that guide you through the setup and operation of virtually every function and setting of your RSP-985 using the buttons on the remote control.

RSP-985 specifications

The Rotel RSP-985 is a high-performance audio/video processor that has gained recognition for its exceptional sound quality and advanced features. This unit is designed for audiophiles who crave an immersive home theater experience, combining innovative technology with user-friendly functionality.

One of the standout characteristics of the RSP-985 is its impressive audio processing capabilities. It is equipped with a high-performance 24-bit digital-to-analog converter (DAC), which enhances the overall sound quality by providing a dynamic range and clarity that rivals more contemporary models. The processor supports various audio formats, including Dolby Digital and DTS surround sound formats, allowing users to enjoy a cinema-like experience in the comfort of their homes.

The RSP-985 features a multi-channel configuration, offering support for up to 5.1 channels. This setup allows for true surround sound reproduction, making it ideal for movie enthusiasts and music lovers alike. The integrated equalization settings enable users to customize audio output to suit their listening environment and preferences, ensuring an optimized auditory experience.

Connectivity is another strong suit of the Rotel RSP-985. The unit provides multiple input options, including digital coaxial, optical, and analog inputs, ensuring compatibility with various audio sources such as DVD players, Blu-ray players, and gaming consoles. The processor also includes a dedicated phono input for vinyl enthusiasts, broadening its appeal for classic audio formats.

Furthermore, the RSP-985 features an intuitive user interface, making navigation through its numerous settings seamless. The unit is designed with ergonomic controls and a clear display, allowing users to easily tweak their audio settings without hassle. Remote control functionality adds convenience, enabling users to adjust settings from the comfort of their seating position.

In addition to its exceptional audio capabilities, the RSP-985 has a robust build quality synonymous with the Rotel brand. The heavy-duty chassis is engineered to minimize interference, ensuring that sound integrity is maintained even in challenging environments.

In conclusion, the Rotel RSP-985 stands out as a versatile and high-quality audio/video processor. With its impressive range of features, advanced audio technologies, and customizability options, it caters to the demands of audiophiles and home theater enthusiasts, making it a worthy consideration for anyone looking to elevate their audio experience.