Fujitsu BX600 manual Radius Configuration Commands Radius accounting mode

SNTP (Simple Network Time Protocol) Commands Command Reference

<seconds>

no dot1x timeout {quiet-period reauth-period server-timeout supp-timeout tx-period}

<seconds> - Value in the range 0 – 65535.

no - This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the default values. Depending on the token used, the corresponding default values are set.

Default Setting

reauth-period: 3600 seconds

quiet-period: 60 seconds

tx-period: 30 seconds

supp-timeout: 30 seconds

server-timeout: 30 seconds

Command Mode

Interface Config

7.9.4Radius Configuration Commands

7.9.4.1 radius accounting mode

This command is used to enable the RADIUS accounting function.

Syntax

radius accounting mode no radius accounting mode

no - This command is used to set the RADIUS accounting function to the default value - that is, the RADIUS accounting function is disabled.

Default Setting

Disabled

Command Mode

Global Config