![](/images/new-backgrounds/1169984/169984245x1.webp)
CLI | Command | |
Reference |
|
|
User Login Configuration screen. If you need to create a new login list for the user, you would do so on the Login Configuration screen.
The
A user that does not have an account configured on the IBP is termed the 'default' or
Selection Criteria
User - Select the user you want to assign to a login list. Note that you must always associate the admin user with the default list. This forces the admin user to always be authenticated locally to prevent full lockout from IBP’s configuration. If you assign a user to a login list that requires remote authentication, the user's access to the IBP from all CLI, web, and telnet sessions will be blocked until the authentication is complete. Refer to the discussion of maximum delay in the RADIUS configuration help.
Configurable Data
Authentication List - Select the authentication login list you want to assign to the user for system login.
Command Buttons
Submit - Sends the updated screen to the IBP and causes the changes to take effect on the IBP. These changes will not be retained across a power cycle unless you perform a save.