Syntax Show mac-addr-table macaddr all | Fujitsu BX600 instruction

Management Commands

Command Reference

Syntax

storm-control flowcontrol no storm-control flowcontrol

no - This command disables 802.3x flow control for the specific interface.

Default Setting

Disabled

Command Mode

Interface Config

7.4.2L2 MAC Address and Multicast Forwarding Database Tables

7.4.2.1show mac-addr-table

This command displays the forwarding database entries. If the command is entered with no parameter, the entire table is displayed. This is the same as entering the optional all parameter. Alternatively, the administrator can enter a MAC Address to display the table entry for the requested MAC address and all entries following the requested MAC address.

Syntax

show mac-addr-table [{<macaddr> all}]

<macaddr> - enter a MAC Address to display the table entry for the requested MAC address.

all – this command displays the entire table.

Default Setting

None

Command Mode

Privileged Exec

Display Message

Mac Address: A unicast MAC address for which the IBP has forwarding and/or filtering

Image 146

Fujitsu BX600 manual Syntax Show mac-addr-table macaddr all, Display Message

Contents

Primergy BX600 Blade Server Systems Primergy BX600 Blade Server Systems Comments… Suggestions… Corrections… Page Contents Page Page Page Important Notes 1Information About Boards 2Compliance Statements Industry Canada Class a LVD Taiwan Bsmi Class a Australia AS/NZS 3548 1995 Class a Features of the IBP Module Head of Line Blocking Back Pressure Support MAC Address Supported Features MAC Address Capacity SupportFlow Control Support Ieee Jumbo Frames Support Automatic Aging for MAC Addresses Layer 2 Features Igmp SnoopingVlan Transparency Supported Features Port Security Port Group Support Port Backup SupportBootP and Dhcp Clients Failover Propogation Support Various Files of Management Operation IBP Module Management FeaturesSave Configuration as file Duplication of Management file Command Line Interface Snmp Alarms and Trap LogsConfiguration File Download and Upload Snmp Version 1,Version 2, and Version Locked Port Support Security FeaturePort Based Authentication Radius Client Description of Hardware Internal Ports Compliance Statements Important Notes Primergy GbE Switch Blade 30/12 Internal Ports List Primergy BX620 Port LEDs Features and BenefitsStatus of LEDs System LED Performance Management Notational Conventions Target Group Electrical data Technical DataDimensions National and international standards Environmental conditions Network Planning Introduction to IBP Connecting to 1000BASE-T Devices Making Network Connections Cable Testing for Existing Category 5 Cable 1000BASE-T Cable Requirements Adjusting Existing Category 5 Cabling for 1000BASE-T 1000BASE-T Pin Assignments Unpacking the IBP Module Package ContentsOverview Connecting the IBP Module Mount the IBP Module Select 2 Console Redirection Switch Blade Start up and Configuration the IBP Module Port Default Settings Configuring the Terminal Under Properties, select VT100 for Emulation mode Booting Device Software Download Erasing the Device ConfigurationBoot Image Download Operation Code CLI Software Download Through Tftp Server System Image Download Tftp Main Menu Web-Based Management Interface Web-Based Management Interface Main Menu Configurable DataCommand Buttons Selection Criteria Configuring Port Configuration Non-Configurable Data Compliance Statements Important Notes Viewing Port Group Information Configurable Data Compliance Statements Important Notes Viewing Management Vlan Information Managing Port Backup Configuring Port Backup Configuration Viewing Port Backup Status Refresh Updates the information on Compliance Statements Important Notes Viewing Panel Description Page Configurable Data Configuring Inband Administration Terminal interface via the EIA-232 port Non-Configurable Data Compliance Statements Important Notes Configuring Telnet Session Page Configurable Data Main Menu Web-Based Management Interface Configuring Serial Port Page Configurable Data Selection Criteria Command Buttons Defining Dhcp Client Configuring Dhcp Restart Configuring Dhcp Client-identifier Defining Snmp Configuring Snmp Community Configuration Configuring Snmp Trap Receiver Configuration Viewing Snmp supported MIBs Main Menu Web-Based Management Interface Command Buttons Viewing Sntp Global Status Non-Configurable Data Configuring Sntp Server Configuration Configurable Data Viewing Sntp Server Status Non-Configurable Data Unknown IPV4 Main Menu Web-Based Management Interface Configurable Data Intelligent Blade Panel Module Refresh Refresh the configuration value again Reset the Passwords to Defaults Page Command Buttons Managing System Utilities Panel Reset Command ButtonsReset All Configuration to Defaults Page Command Buttons Overview Web-Based Management Interface Uploading Specific Files from Panel Removing Specific File Copying Running Configuration to Panel Defining Ping Function Submit This will initiate the ping Non-Configurable Data Viewing Radius Statistics Page Non-Configurable Data Viewing Radius Server Statistics Page Selection Criteria Command Buttons Non-Configurable Data Resetting All Radius Statistics Page Command Buttons Configurable Data Command Buttons Non-Configurable Data Overview Web-Based Management Interface Viewing Buffered Log Configuring Command Logger Page Configurable Data Configuring Console Log Viewing Event Log Configuring Hosts configuration Page Configurable Data Configuring syslog configuration Page Configurable Data Overview Web-Based Management Interface Viewing Login Session Page Non-Configurable Data CLI Mode-based Topology Command Reference Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference 104 Intelligent Blade Panel Module 105 Intelligent Blade Panel Module CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference Viewing Each Port Summary Statistics Page Selection Criteria Configurable Data Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference Viewing Access Control Summary Page Non-Configurable Data Command Buttons Non-Configurable Data Defining Access Control User Login Page Selection Criteria Defining Each Port Access Privileges Page Selection Criteria CLI Mode-based Topology Command Reference Managing IP Filter IP Filter Configuration Selection Criteria Defining User Login Selection Criteria Example Ip address ipaddr netmask vlan-id CLI Command FormatCommand Example Clear port-group Values CLI Mode-based TopologyParameters Network Address Syntax Address Type Format Range IPAddr MacAddr Annotations System Information and Statistics commands Show running-config Show eventlog Show running-config all scriptname Show sysinfo Show hardware Show systemSystem Information Show version Show loginsession Show interface status slot/port all Device Configuration CommandsInterface Show interface status Show interface counters Show interfaceShow interface slot/port Default Setting Show interface counters detailed slot/port switchport Total Packets Transmitted Octets Total Packets Received Without ErrorsTotal Packets Received with MAC Errors Total Transmited Packets Discards Total Transmit ErrorsTotal Packets Transmitted Successfully Management Commands Command Reference Show interface IBP Interface Interface range Speed-duplex all 10 100 full-duplex half-duplex Speed-duplexSpeed-duplex 10 100 full-duplex half-duplex Full duplex Full duplex half duplex Half duplex Negotiate all no negotiate all NegotiateNegotiate no negotiate Capabilities Storm-control flowcontrol no storm-control flowcontrol DescriptionStorm-control flowcontrol Syntax Show mac-addr-table macaddr all Show mac-address-table igmpsnooping Show mac-address-table multicast Show mac-address-table multicast macaddr vlanid all Show mac-address-table stats Show mac-address-table stats Default SettingShow mac-address-table agetime Default Setting Show mac-address-table agetime Mac-address-table aging-time Management Vlan Show mgmt-vlan Mgmt-vlan mgmtVlanName no mgmt-vlan mgmtVlanName Mgmt-vlanMgmt-vlan mgmtVlanName vlan-id no mgmt-vlan mgmtVlanName Show igmpsnooping Igmp Snooping Show Commands Show igmp snoopingConfiguration Commands Igmpsnooping Igmpsnooping portGroupName no igmpsnooping portGroupName Show lacp Port Channel LacpLacp portGroupName no lacp portGroupName Port Group Show Commands Port-group portGroupName no port-group portGroupName Port Backup Show Commands Default Setting Command Mode Configuration Commands Port-backupPort-backup portGroupName no port-backup portGroupName Port-backup no port-backup Link State Show Commands Configuration Commands Linkstate Linkstate portGroupName no linkstate portGroupName Show ip redirects Management CommandsNetwork Commands Show ip interface Mtu 1518-9216 no mtu Show ip filter1.4 mtu Ip default-gateway gateway no ip default-gateway Command UsageIp default-gateway Ip address Ip address mgmt-vlan Ip address protocol bootp dhcp vlanID noneIp address protocol Ip filter Ip filter no ip filter Serial Interface Commands Show line console Ip filter ipaddr no ip filter ipaddr Line console Baudrate Password-threshold 0-120 no password-threshold Exec-timeoutPassword-threshold Telnet host port debug line echo Telnet Session CommandsSilent-time Show line vty Line vty Exec-timeout 1-160 no exec-timeout Sessions MaxsessionsMaxsessions 0-5 no maxsessions Telnet sessions no telnet sessions Sessions no sessionsTelnet sessions Telnet maxsessions Telnet maxsessions 0-5 no maxsessions Telnet exec-timeoutTelnet exec-timeout 1-160 no telnet exec-timeout Snmp Server Commands Show snmp Show telnet Show trapflags Snmp-server location Snmp-server sysnameSnmp-server sysname name Syntax Snmp-server location loc Snmp-server community name no snmp-server community name Snmp-server contactSnmp-server community Default Setting Snmp-server community ro rw name Snmp-server host ipaddr name no snmp-server host name Snmp-server enable trapsSnmp-server host No This command disables Multiple User trap Snmp Trap Commands Show snmptrap Snmp trap link-status all no snmp trap link-status all Snmp trap link-statusSnmp trap link-status no snmp trap link-status Snmptrap ipaddr Snmptrap name ipaddrSnmptrap name ipaddr no snmptrap name ipaddr Http commands Show ip http Snmptrap modeSnmptrap mode name ipaddr no snmptrap mode name ipaddr Snmptrap ipaddr name ipaddr ipaddrnew Ip javamode Ip javamode no ip javamode Ip http server Ip http portIp http port 1-65535 no ip http port Ip http server no ip http server Ip http secure-server Ip http secure-portIp http secure-port portid no ip http secure-port Ip http secure-server no ip http secure-server Secure Shell SSH Commands Show ip ssh Ip http secure-protocol Ip ssh protocol Ip sshIp ssh no ip ssh Ip ssh maxsessions 0-5 no ip ssh maxsessions Ip ssh timeoutIp ssh maxsessions Ip dhcp client-identifier Ip ssh timeout 1-160 no ip ssh timeoutDhcp Client Commands Ip dhcp restart System Burned In MAC Address Lock lockidentifier Exclusive no lock lockidentifierALL Lock CommandsLockmessage messagestring default Lockmessage Lockreset Show lock Show logging buffered System Log Management CommandsShow Commands Show logging Show logging hosts Show logging traplogShow logging traplogs Logging buffered no logging buffered Configuration Commands Logging bufferedDisplay Message Index used for deleting Logging console severitylevel 0-7 no logging console Logging buffered wrap no logging buffered wrapLogging console Logging host Logging host hostaddress port severitylevel Logging syslog no logging syslog Logging host reconfigure hostindex hostaddressLogging syslog Logging syslog port portid no logging syslog port Clear logging buffered Script apply scriptname Script Management CommandsScript apply Script delete Script show scriptname Script listScript show Configuration Commands Username User Account Management CommandsShow Commands Show users Username username password nopassword no username username Username snmpv3 authentication Username snmpv3 encryption Show authentication Security CommandsShow Commands Show users authentication Show authentication users Show dot1x Show dot1x detail Show dot1x statistics Show dot1x statistics slot/port Show dot1x users Show dot1x summaryShow dot1x summary slot/port all Show radius Secret Configured Yes / NoShow radius-servers Radius Accounting Mode Enabled or disabled Show radius accounting statistics ipaddr Show radius statistics ipaddr Secret Configured Yes or NoShow radius statistics Show tacacs Show port-security Show port-security dynamic slot/port Configuration Commands Authentication login Username defaultlogin Possible method values are local, radius, reject, and tacacs Username login Username login user listname 3 Dot1x Configuration Commands 3.1 dot1x initialize 3.2 dot1x default-login 3.4 dot1x system-auth-control 3.3 dot1x loginDot1x login user listname Dot1x system-auth-control no dot1x system-auth-control 3.5 dot1x user 3.6 dot1x port-control 3.7 dot1x max-req 3.9 dot1x re-reauthenticate 3.8 dot1x re-authenticationDot1x re-authentication no dot1x re-authentication Dot1x max-req 1-10 no dot1x max-req 3.10 dot1x timeout Radius Configuration Commands Radius accounting mode Radius accounting mode no radius accounting mode Radius-server host Radius-sever key Radius-server retransmit Retries the maximum number of times Range 1 Radius-server msgauth Radius-server timeoutRadius-server timeout seconds no radius-server timeout Tacacs no tacacs Tacacs Configuration CommandsRadius-server primary Tacacs server-ip Tacacs modeTacacs mode 1-3 master slave no tacacs mode Tacacs server-ip 1-3 ipaddr no tacacs server-ip Tacacs key Tacacs portTacacs port 1-3 1-65535 no tacacs port Tacacs key 1-3 no tacacs key Tacacs retry Tacacs timeoutTacacs timeout 1-3 1-255 no tacacs timeout Tacacs retry 1-3 1-9 no tacacs retry Port-security max-dynamic Port Security Configuration Commands Port-securityPort-security no port-security Default Setting Port-security max-static Port-security max-static 0-20 no port-security max-static Port-security mac-address move Syntax Port-security mac-address move Default SettingPort-security mac-address Show sntp client Sntp Simple Network Time Protocol CommandsShow Commands Show sntp Configuration Commands Sntp broadcast client poll-interval Sntp client mode Sntp client mode broadcast unicast no sntp client mode Sntp unicast client poll-interval Sntp client portSntp client port portid 6-10 no sntp client port Sntp unicast client poll-timeout Sntp unicast client poll-retry Sntp server Sntp clock timezone Sntp clock timezone name 0-12 0-59 before-utc after-utc System Utilities10.2.9 Clear Clear arp Clear traplog Clear eventlog Clear config Clear pass Clear counters Syntax Clear mac-addr-table dynamic Default SettingClear mac address table Clear counters slot/port all Enable passwd Clear igmp snooping Clear dot1x statistics Syntax Clear ip filter Default SettingClear ip filter Syntax Clear dot1x statistics all slot/port Copy Clear radius statisticsClear tacacs Privileged Exec Files download from PC to board Syntax Copy running-config startup-config filename Syntax Delete filename Syntax Copy clibanner url copy url clibanner no clibannerDelete 11.4 dir Boot-system Dir boot-rom config opcode filenameWhichboot Display Message Column Heading Description Boot-system boot-rom config opcode filename Ping Traceroute Calendar set Logging cli-commandSyntax Logging cli-command Default Setting Calendar set mm/dd/yy hhmmss Disconnect ConfigureReload Disconnect 0-10 all Quit Syntax Quit Default SettingHostname Syntax Ip dhcp client-identifier text text hex hex Dhcp CommandsSyntax Ip dhcp restart Default Setting Using Snmp Supported MIBs Standard MIBs are listed in the following table Private enterprise MIB is listed below Accessing MIB Objects RFC 2233 IF-MIB Supported MIBs Using Snmp Supported MIBs Using Snmp Supported Traps Snmp traps supported include the following items Default Settings SB9 Default Config In-band Administration Line console mode SSL Troubleshooting and Tips Diagnosing IBP Indicators Accessing the Management Interface Symptom Action