Fujitsu BX600 manual Ip http port 1-65535 no ip http port, Ip http server

Management Commands Command Reference

7.5.6.3ip http port

This command is used to set the http port where port can be 1-65535 and the default is port 80.

Syntax

ip http port <1-65535> no ip http port

<1-65535> - HTTP Port value.

no - This command is used to reset the http port to the default value.

Default Setting

80

Command Mode

Global Config

7.5.6.4ip http server

This command enables access to the IBP through the Web interface. When access is enabled, the user can login to the IBP from the Web interface. When access is disabled, the user cannot login to the IBP's Web server.

Disabling the Web interface takes effect immediately. All interfaces are affected.

Syntax

ip http server no ip http server

no - This command disables access to the IBP through the Web interface. When access is disabled, the user cannot login to the IBP's Web server.

Default Setting

Enabled