Fujitsu BX600 manual SB9 Default Config

Supported MIBs			Using SNMP
	SSL	HTTP Mode (Secure): Disabled
		Secure Port: 443
		Secure Protocol Level(s): TLS1 SSL3
	802.1X Port Authent.	disable
	RADIUS Client	disable
	IGMP Snooping	disable
	802.3ad	enable
	SNTP Client	disable
	TACACS	disable
	StormControl	enable
	Link State	disable
	Port-Backup	disable
	SNMP

9.2The default settings for all the configuration commands

The default settings for all the configuration commands are shown in the following table.

SB9 DEFAULT CONFIG
configure mode
	Sntp	sntp unicast client poll-interval 6
		sntp unicast client poll-timeout 5
		sntp unicast client poll-retry 1
		sntp broadcast client poll-interval 6
		sntp client port 123
		sntp clock timezone Taipei 8 0 before-utc
	logging buffered	logging buffered
		logging buffered wrap
		no logging console
		no logging syslog
		no logging syslog port
	Ip	ip javamode
		ip dhcp client-identifier text Default
		(system clear config : ip dhcp client-identifier hex <MAC
		address>)
		no ip http secure-server
		ip http secure-protocol TLS1 SSL3
		ip http secure-port 443
		ip http server
		no ip ssh
		ip ssh maxsessions 5
		ip ssh timeout 5