Fujitsu BX600 manual Configuring syslog configuration Page Configurable Data

Overview Web-Based Management Interface

-Error (3): error conditions

-Warning (4): warning conditions

-Notice(5): normal but significant conditions

-Informational(6): informational messages

-Debug(7): debug-level messages

Command Buttons

Submit - Update the IBP with the values you entered.

Refresh - Refetch the database and display it again starting with the first entry in the table.

Delete - Delete a configured host.

6.2.4.1.7Configuring syslog configuration Page Configurable Data

Admin Status -For enabling and disabling logging to configured syslog hosts. Setting this to disable stops logging to all syslog hosts. Disable means no messages will be sent to any collector/relay. Enable means messages will be sent to configured collector/relays using the values configured for each collector/relay. Enable/Disable the operation of the syslog function by selecting the corresponding line on the pulldown entry field.

Local UDP Port This is the port on the local host from which syslog messages are sent. The default port is 514. Specify the local port in the text field.

Non-Configurable Data

Messages Relayed - The count of syslog messages relayed.

Messages Ignored - The count of syslog messages ignored.

Command Buttons

Submit - Update the IBP module with the values you entered.

Refresh - Refetch the database and display it again starting with the first entry in the table.