SNTP (Simple Network Time Protocol) Commands

 

Command Reference

7.9.3Dot1x Configuration Commands

7.9.3.1 dot1x initialize

This command begins the initialization sequence on the specified port. This command is only valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be returned.

Syntax

dot1x initialize <slot/port>

<slot/port> - is the desired interface number.

Default Setting

None

Command Mode

Privileged Exec

7.9.3.2 dot1x default-login

This command assigns the authentication login list to use for non-configured users for 802.1x port security. This setting is over-ridden by the authentication login list assigned to a specific user if the user is configured locally. If this value is not configured, users will be authenticated using local authentication only.

Syntax

dot1x defaultl-login <listname>

<listname> - an authentication login list.

Default Setting

None

Command Mode

Global Config

Page 221
Image 221
Fujitsu BX600 manual 3 Dot1x Configuration Commands 3.1 dot1x initialize, 3.2 dot1x default-login