Management Commands

 

Command Reference

Default Setting

SSH1 and SSH2

Command Mode

Global Config

7.5.7.4ip ssh maxsessions

This command specifies the maximum number of SSH connection sessions that can be established. A value of 0 indicates that no ssh connection can be established. The range is 0 to 5.

Syntax

ip ssh maxsessions <0-5> no ip ssh maxsessions

<0-5> - maximum number of sessions.

no - This command sets the maximum number of SSH connection sessions that can be established to the default value.

Default Setting

SSH1 and SSH2

Command Mode

Global Config

7.5.7.5ip ssh timeout

This command sets the SSH connection session timeout value, in minutes. A session is active as long as the session has been idle for the value set. A value of 0 indicates that a session remains active indefinitely. The time is a decimal value from 0 to 160. Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration.

Page 190
Image 190
Fujitsu BX600 manual Ip ssh maxsessions 0-5 no ip ssh maxsessions, Ip ssh timeout