System Log Management Commands | Fujitsu BX600 manual

SNTP (Simple Network Time Protocol) Commands

Command Reference

7.6System Log Management Commands

7.6.1Show Commands

7.6.1.1 show logging

This command displays logging.

Syntax

Show logging

Default Setting

None

Command Mode

Privileged Exec

Display Message

Logging Client Local Port The port on the collector/relay to which syslog messages are sent

CLI Command Logging The mode for CLI command logging. Console Logging The mode for console logging.

Console Logging Severity Filter The minimum severity to log to the console log. Messages with an equal or lower numerical severity are logged.

Buffered Logging The mode for buffered logging.

Syslog Logging The mode for logging to configured syslog hosts. If set to disable logging stops to all syslog hosts.

Log Messages Received The number of messages received by the log process. This includes messages that are dropped or ignored

Log Messages Dropped The number of messages that could not be processed. Log Messages Relayed The number of messages that are relayed.

Log Messages Ignored The number of messages that are ignored.

7.6.2show logging buffered

This command displays the message log maintained by the IBP. The message log contains system trace information.

Syntax

show logging buffered

194	Intelligent Blade Panel Module

Image 195

Fujitsu BX600 manual System Log Management Commands, Show Commands Show logging, Show logging buffered

Contents

Primergy BX600 Blade Server Systems Primergy BX600 Blade Server Systems Comments… Suggestions… Corrections… Page Contents Page Page Page 1Information About Boards Important Notes Industry Canada Class a 2Compliance Statements LVD Taiwan Bsmi Class a Australia AS/NZS 3548 1995 Class a Head of Line Blocking Features of the IBP Module Jumbo Frames Support MAC Address Supported Features MAC Address Capacity SupportFlow Control Support Ieee Back Pressure Support Port Security Layer 2 Features Igmp SnoopingVlan Transparency Supported Features Automatic Aging for MAC Addresses Failover Propogation Support Port Backup SupportBootP and Dhcp Clients Port Group Support Duplication of Management file IBP Module Management FeaturesSave Configuration as file Various Files of Management Operation Snmp Version 1,Version 2, and Version Snmp Alarms and Trap LogsConfiguration File Download and Upload Command Line Interface Radius Client Security FeaturePort Based Authentication Locked Port Support Internal Ports Description of Hardware Compliance Statements Important Notes Primergy BX620 Primergy GbE Switch Blade 30/12 Internal Ports List System LED Features and BenefitsStatus of LEDs Port LEDs Management Performance Notational Conventions Target Group National and international standards Technical DataDimensions Electrical data Environmental conditions Introduction to IBP Network Planning Making Network Connections Connecting to 1000BASE-T Devices 1000BASE-T Cable Requirements Cable Testing for Existing Category 5 Cable 1000BASE-T Pin Assignments Adjusting Existing Category 5 Cabling for 1000BASE-T Package Contents OverviewUnpacking the IBP Module Mount the IBP Module Connecting the IBP Module Select 2 Console Redirection Switch Blade Port Default Settings Start up and Configuration the IBP Module Under Properties, select VT100 for Emulation mode Configuring the Terminal Booting Device Erasing the Device Configuration Boot Image DownloadSoftware Download System Image Download Operation Code CLI Software Download Through Tftp Server Tftp Main Menu Web-Based Management Interface Web-Based Management Interface Selection Criteria Configurable DataCommand Buttons Main Menu Non-Configurable Data Configuring Port Configuration Compliance Statements Important Notes Viewing Port Group Information Configurable Data Compliance Statements Important Notes Viewing Management Vlan Information Managing Port Backup Configuring Port Backup Configuration Viewing Port Backup Status Refresh Updates the information on Compliance Statements Important Notes Viewing Panel Description Page Configurable Data Terminal interface via the EIA-232 port Configuring Inband Administration Non-Configurable Data Compliance Statements Important Notes Configuring Telnet Session Page Configurable Data Main Menu Web-Based Management Interface Configuring Serial Port Page Configurable Data Selection Criteria Command Buttons Configuring Dhcp Client-identifier Defining Dhcp Client Configuring Dhcp Restart Defining Snmp Configuring Snmp Community Configuration Configuring Snmp Trap Receiver Configuration Viewing Snmp supported MIBs Main Menu Web-Based Management Interface Command Buttons Viewing Sntp Global Status Non-Configurable Data Configuring Sntp Server Configuration Configurable Data Unknown IPV4 Viewing Sntp Server Status Non-Configurable Data Main Menu Web-Based Management Interface Configurable Data Intelligent Blade Panel Module Refresh Refresh the configuration value again Managing System Utilities Panel Reset Command Buttons Reset All Configuration to Defaults Page Command ButtonsReset the Passwords to Defaults Page Command Buttons Overview Web-Based Management Interface Uploading Specific Files from Panel Removing Specific File Defining Ping Function Copying Running Configuration to Panel Submit This will initiate the ping Non-Configurable Data Viewing Radius Statistics Page Non-Configurable Data Viewing Radius Server Statistics Page Selection Criteria Command Buttons Non-Configurable Data Resetting All Radius Statistics Page Command Buttons Configurable Data Command Buttons Non-Configurable Data Overview Web-Based Management Interface Viewing Buffered Log Configuring Command Logger Page Configurable Data Viewing Event Log Configuring Console Log Configuring Hosts configuration Page Configurable Data Configuring syslog configuration Page Configurable Data Overview Web-Based Management Interface Viewing Login Session Page Non-Configurable Data CLI Mode-based Topology Command Reference Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference 104 Intelligent Blade Panel Module 105 Intelligent Blade Panel Module CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference Viewing Each Port Summary Statistics Page Selection Criteria Configurable Data Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference Viewing Access Control Summary Page Non-Configurable Data Command Buttons Non-Configurable Data Defining Access Control User Login Page Selection Criteria Defining Each Port Access Privileges Page Selection Criteria CLI Mode-based Topology Command Reference Managing IP Filter IP Filter Configuration Selection Criteria Defining User Login Selection Criteria Example Clear port-group CLI Command FormatCommand Example Ip address ipaddr netmask vlan-id Network Address Syntax Address Type Format Range IPAddr CLI Mode-based TopologyParameters Values Annotations MacAddr System Information and Statistics commands Show eventlog Show running-config Show sysinfo Show running-config all scriptname Show system System InformationShow hardware Show version Show loginsession Device Configuration Commands Interface Show interface statusShow interface status slot/port all Show interface Show interface slot/portShow interface counters Default Setting Show interface counters detailed slot/port switchport Total Packets Received Without Errors Total Packets Received with MAC ErrorsTotal Packets Transmitted Octets Total Transmit Errors Total Packets Transmitted SuccessfullyTotal Transmited Packets Discards Management Commands Command Reference Show interface IBP Interface range Interface Full duplex Full duplex half duplex Half duplex Speed-duplexSpeed-duplex 10 100 full-duplex half-duplex Speed-duplex all 10 100 full-duplex half-duplex Negotiate Negotiate no negotiateNegotiate all no negotiate all Capabilities Description Storm-control flowcontrolStorm-control flowcontrol no storm-control flowcontrol Syntax Show mac-addr-table macaddr all Show mac-address-table igmpsnooping Show mac-address-table multicast macaddr vlanid all Show mac-address-table multicast Show mac-address-table agetime Show mac-address-table stats Default SettingShow mac-address-table agetime Default Setting Show mac-address-table stats Management Vlan Show mgmt-vlan Mac-address-table aging-time Mgmt-vlan Mgmt-vlan mgmtVlanName vlan-id no mgmt-vlan mgmtVlanNameMgmt-vlan mgmtVlanName no mgmt-vlan mgmtVlanName Igmpsnooping portGroupName no igmpsnooping portGroupName Igmp Snooping Show Commands Show igmp snoopingConfiguration Commands Igmpsnooping Show igmpsnooping Port Channel Lacp Lacp portGroupName no lacp portGroupNameShow lacp Port-group portGroupName no port-group portGroupName Port Group Show Commands Port Backup Show Commands Configuration Commands Port-backup Port-backup portGroupName no port-backup portGroupNameDefault Setting Command Mode Link State Show Commands Port-backup no port-backup Linkstate portGroupName no linkstate portGroupName Configuration Commands Linkstate Management Commands Network Commands Show ip interfaceShow ip redirects Show ip filter 1.4 mtuMtu 1518-9216 no mtu Ip address Command UsageIp default-gateway Ip default-gateway gateway no ip default-gateway Ip address protocol bootp dhcp vlanID none Ip address protocolIp address mgmt-vlan Ip filter no ip filter Ip filter Ip filter ipaddr no ip filter ipaddr Serial Interface Commands Show line console Baudrate Line console Exec-timeout Password-thresholdPassword-threshold 0-120 no password-threshold Telnet Session Commands Silent-timeTelnet host port debug line echo Line vty Show line vty Exec-timeout 1-160 no exec-timeout Maxsessions Maxsessions 0-5 no maxsessionsSessions Telnet maxsessions Sessions no sessionsTelnet sessions Telnet sessions no telnet sessions Telnet exec-timeout Telnet exec-timeout 1-160 no telnet exec-timeoutTelnet maxsessions 0-5 no maxsessions Show telnet Snmp Server Commands Show snmp Show trapflags Syntax Snmp-server location loc Snmp-server sysnameSnmp-server sysname name Snmp-server location Snmp-server contact Snmp-server communitySnmp-server community name no snmp-server community name Default Setting Snmp-server community ro rw name Snmp-server enable traps Snmp-server hostSnmp-server host ipaddr name no snmp-server host name No This command disables Multiple User trap Snmp Trap Commands Show snmptrap Snmp trap link-status Snmp trap link-status no snmp trap link-statusSnmp trap link-status all no snmp trap link-status all Snmptrap name ipaddr Snmptrap name ipaddr no snmptrap name ipaddrSnmptrap ipaddr Snmptrap ipaddr name ipaddr ipaddrnew Snmptrap modeSnmptrap mode name ipaddr no snmptrap mode name ipaddr Http commands Show ip http Ip javamode no ip javamode Ip javamode Ip http server no ip http server Ip http portIp http port 1-65535 no ip http port Ip http server Ip http secure-server no ip http secure-server Ip http secure-portIp http secure-port portid no ip http secure-port Ip http secure-server Ip http secure-protocol Secure Shell SSH Commands Show ip ssh Ip ssh Ip ssh no ip sshIp ssh protocol Ip ssh timeout Ip ssh maxsessionsIp ssh maxsessions 0-5 no ip ssh maxsessions Ip ssh timeout 1-160 no ip ssh timeout Dhcp Client Commands Ip dhcp restartIp dhcp client-identifier System Burned In MAC Address Lockmessage Lock CommandsLockmessage messagestring default Lock lockidentifier Exclusive no lock lockidentifierALL Show lock Lockreset System Log Management Commands Show Commands Show loggingShow logging buffered Show logging traplog Show logging traplogsShow logging hosts Configuration Commands Logging buffered Display Message Index used for deletingLogging buffered no logging buffered Logging buffered wrap no logging buffered wrap Logging consoleLogging console severitylevel 0-7 no logging console Logging host hostaddress port severitylevel Logging host Logging host reconfigure hostindex hostaddress Logging syslogLogging syslog no logging syslog Clear logging buffered Logging syslog port portid no logging syslog port Script delete Script Management CommandsScript apply Script apply scriptname Script list Script showScript show scriptname User Account Management Commands Show Commands Show usersConfiguration Commands Username Username snmpv3 authentication Username username password nopassword no username username Username snmpv3 encryption Security Commands Show Commands Show users authenticationShow authentication Show dot1x Show authentication users Show dot1x detail Show dot1x statistics slot/port Show dot1x statistics Show dot1x summary Show dot1x summary slot/port allShow dot1x users Secret Configured Yes / No Show radius-serversShow radius Show radius accounting statistics ipaddr Radius Accounting Mode Enabled or disabled Secret Configured Yes or No Show radius statisticsShow radius statistics ipaddr Show tacacs Show port-security Show port-security dynamic slot/port Configuration Commands Authentication login Possible method values are local, radius, reject, and tacacs Username defaultlogin Username login user listname Username login 3.2 dot1x default-login 3 Dot1x Configuration Commands 3.1 dot1x initialize Dot1x system-auth-control no dot1x system-auth-control 3.3 dot1x loginDot1x login user listname 3.4 dot1x system-auth-control 3.6 dot1x port-control 3.5 dot1x user 3.7 dot1x max-req Dot1x max-req 1-10 no dot1x max-req 3.8 dot1x re-authenticationDot1x re-authentication no dot1x re-authentication 3.9 dot1x re-reauthenticate 3.10 dot1x timeout Radius accounting mode no radius accounting mode Radius Configuration Commands Radius accounting mode Radius-sever key Radius-server host Retries the maximum number of times Range 1 Radius-server retransmit Radius-server timeout Radius-server timeout seconds no radius-server timeoutRadius-server msgauth Tacacs Configuration Commands Radius-server primaryTacacs no tacacs Tacacs server-ip 1-3 ipaddr no tacacs server-ip Tacacs modeTacacs mode 1-3 master slave no tacacs mode Tacacs server-ip Tacacs key 1-3 no tacacs key Tacacs portTacacs port 1-3 1-65535 no tacacs port Tacacs key Tacacs retry 1-3 1-9 no tacacs retry Tacacs timeoutTacacs timeout 1-3 1-255 no tacacs timeout Tacacs retry Port Security Configuration Commands Port-security Port-security no port-security Default SettingPort-security max-dynamic Port-security max-static 0-20 no port-security max-static Port-security max-static Syntax Port-security mac-address move Default Setting Port-security mac-addressPort-security mac-address move Sntp Simple Network Time Protocol Commands Show Commands Show sntpShow sntp client Configuration Commands Sntp broadcast client poll-interval Sntp client mode broadcast unicast no sntp client mode Sntp client mode Sntp client port Sntp client port portid 6-10 no sntp client portSntp unicast client poll-interval Sntp unicast client poll-retry Sntp unicast client poll-timeout Sntp clock timezone Sntp server Clear Clear arp System Utilities10.2.9 Sntp clock timezone name 0-12 0-59 before-utc after-utc Clear eventlog Clear traplog Clear pass Clear config Clear counters slot/port all Syntax Clear mac-addr-table dynamic Default SettingClear mac address table Clear counters Clear igmp snooping Enable passwd Syntax Clear dot1x statistics all slot/port Syntax Clear ip filter Default SettingClear ip filter Clear dot1x statistics Clear radius statistics Clear tacacsCopy Privileged Exec Files download from PC to board Syntax Copy running-config startup-config filename 11.4 dir Syntax Copy clibanner url copy url clibanner no clibannerDelete Syntax Delete filename Display Message Column Heading Description Dir boot-rom config opcode filenameWhichboot Boot-system Ping Boot-system boot-rom config opcode filename Traceroute Calendar set mm/dd/yy hhmmss Logging cli-commandSyntax Logging cli-command Default Setting Calendar set Disconnect 0-10 all ConfigureReload Disconnect Syntax Quit Default Setting HostnameQuit Dhcp Commands Syntax Ip dhcp restart Default SettingSyntax Ip dhcp client-identifier text text hex hex Using Snmp Standard MIBs are listed in the following table Supported MIBs Private enterprise MIB is listed below RFC 2233 IF-MIB Accessing MIB Objects Supported MIBs Using Snmp Supported MIBs Using Snmp Snmp traps supported include the following items Supported Traps Default Settings SB9 Default Config In-band Administration Line console mode SSL Diagnosing IBP Indicators Troubleshooting and Tips Symptom Action Accessing the Management Interface