Fujitsu BX600 manual Show port-security dynamic slot/port

SNTP (Simple Network Time Protocol) Commands Command Reference

Privileged Exec

Display Message

Port Security Administration Mode: Port lock mode for the entire system.

This command shows the port-security settings for a particular interface or all interfaces.

Syntax

show port-security { <slot/port> all }

Default Setting

None

Command Mode

Privileged Exec

Display Message

Intf Interface Number.

Interface Admin Mode Port Locking mode for the Interface.

Dynamic Limit Maximum dynamically allocated MAC Addresses.

Static Limit Maximum statically allocated MAC Addresses.

Violation Trap Mode Whether violation traps are enabled.

This command shows the dynamically locked MAC addresses for port.

Syntax

show port-security dynamic <slot/port>

Default Setting

None

Command Mode

Privileged Exec

Display Message

MAC address Dynamically locked MAC address.

This command shows the statically locked MAC addresses for port.