Fujitsu BX600 manual Silent-time, Telnet Session Commands, Telnet host port debug line echo

Management Commands Command Reference

7.5.2.6silent-time

This command uses to set the amount of time the management console is inaccessible after the number of unsuccessful logon tries exceeds the threshold value.

Syntax

Silent-time <0-65535>

<0-65535> - silent time (Range: 0 - 65535) in seconds. no - This command sets the maximum value to the default.

Default Setting

0

Command Mode

Line Config

7.5.3Telnet Session Commands

7.5.3.1telnet

This command establishes a new outbound telnet connection to a remote host.

Syntax

telnet <host> [port] [debug] [line] [echo]

<host> - A hostname or a valid IP address.

[port] - A valid decimal integer in the range of 0 to 65535, where the default value is 23. [debug] - Display current enabled telnet options.

[line] - Set the outbound telnet operational mode as ‘linemode’, where by default, the operational mode is ‘character mode’.

[echo] - Enable local echo.