SMC Networks SMC6924VF manual Configuring STA for Ports

USING THE SYSTEM CONFIGURATION PROGRAM

Configuring STA for Ports

The following figure and table describe port STA configuration.

Spanning Tree Port Configuration : Unit 1 Port 1 - 12

================================
Fast forwarding on all ports			: [Enable]	[Disable]
Port	Type	Priority	Cost	FastForwarding

-----------------------------------------------------

1	100FX	128	19	ENABLED
2	100FX	128	19	ENABLED
3	100FX	128	19	ENABLED
4	100FX	128	19	ENABLED
5	100FX	128	19	ENABLED
6	100FX	128	19	ENABLED
7	100FX	128	19	ENABLED
8	100FX	128	19	ENABLED
9	100FX	128	19	ENABLED
10	100FX	128	19	ENABLED
11	100FX	128	19	ENABLED
12	100FX	128	19	ENABLED

<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>

other keys to make changes.

Parameter	Default	Description
Fast	Enabled	See “FastForwarding” in this table.
forwarding on
all ports
Type		Shows port type as:
		100FX	: 100BASE-FX
		1000SX	: 1000BASE-SX
		1000LX	: 1000BASE-LX
		1000T	: 1000BASE-T
Priority	128	Defines the priority for the use of a port in the
		STA algorithm. If the path cost for all ports on a

switch are the same, the port with the highest priority (i.e., lowest value) will be configured as an active link in the Spanning Tree. Where more than one port is assigned the highest priority, the port with lowest numeric identifier will be enabled. The range is 0 - 255.

2-35