| USING THE SYSTEM CONFIGURATION PROGRAM |
Parameter | Description |
Default Gateway | Gateway used to pass trap messages from the system’s |
| agent to the management station. Note that the gateway |
| must be defined if the management station is located in |
| a different IP segment. The default value is null. |
IP State | Specifies whether IP functionality is enabled via manual |
| configuration, or set by Boot Protocol (BOOTP). |
| Options include: |
| |
| default or user specified IP Configuration. (This is the |
| default setting.) |
| BOOTP Get IP - IP is enabled but will not function until |
| a BOOTP reply has been received. BOOTP requests will |
| be periodically broadcast by the switch in an effort to |
| learn its IP address. (BOOTP values can include the IP |
| address, default gateway, subnet mask, and TFTP server |
| IP.) |
Page 29
Image 29
