|
| USING THE SYSTEM CONFIGURATION PROGRAM |
Parameter | Default | Description |
Spanning Tree Enabled | Enable this parameter to participate in a STA | |
Protocol |
| compliant network. |
Priority | 32,768 | Device priority is used in selecting the root |
|
| device, root port, and designated port. The |
|
| device with the highest priority becomes the |
|
| STA root device. However, if all devices have |
|
| the same priority, the device with the lowest |
|
| MAC address will then become the root |
|
| device. |
|
| Enter a value from 0 - 65535. |
|
| Remember that the lower the numeric value, |
|
| the higher the priority. |
Hello Time | 2 | Time interval (in seconds) at which the root |
device transmits a configuration message. The minimum value is1.
The maximum value is
the lower of 10 or [(Max. Message Age / 2)
