SMC Networks SMC6924VF manual Console Configuration, Vlan

	WEB-BASED MANAGEMENT
Parameter	Description
Link Status	Indicates if the port has a valid connection to an
	external device.
Speed Status	Indicates the current port speed.
Duplex Status	Indicates the port’s current duplex mode.

Flow Control Status Shows the flow control type in use. Flow control can eliminate frame loss by “blocking” traffic from end stations connected directly to the switch.

VLAN	The VLAN ID assigned to untagged frames received
	on this port. Use the PVID to assign ports to the same
	untagged VLAN.

Console Configuration

If you are having difficulties making an out-of-band console connection to the serial port on the agent module, you can display or modify the current settings for the serial port through the Web agent. Click on the serial port icon in the switch image to display or configure these settings, as shown below.

Parameter	Default	Description
Baud rate	19200 bps	The rate at which data is sent between
		devices.
		Options : 2400, 4800, 9600, 19200, and auto
		detection.
		Note that when AUTO is selected, you need
		to first press the Enter key once to set the
		data rate and initialize the connection.

3-5