SMC Networks SMC6924VF manual 2-43, Parameter, Description

USING THE SYSTEM CONFIGURATION PROGRAM

You can use the Port Trunking Configuration screen set up port trunks as shown below:

		Port Trunking Configuration
		===========================
Trunk ID	Status		Member List
		1	2		3	4
---------	--------	-----------	-----------	-----------		-----------
--	--------	Unit : -	Unit : -	Unit : -		Unit : -
		Port : --	Port : --	Port : --		Port : --
--	--------	Unit : -	Unit : -	Unit : -		Unit : -
		Port : --	Port : --	Port : --		Port : --
--	--------	Unit : -	Unit : -	Unit : -		Unit : -
		Port : --	Port : --	Port : --		Port : --
Trunk ID : 1			Trunk ID : 1		Member Unit : 1
					Member Port : 1
[Show]	[More]
[Enable]	[Disable]		[Add]	[Delete]
			<OK>
Use <TAB> or arrow keys to move, other keys to make changes.

Parameter	Description
Trunk ID	Configure up to five trunks per switch.
Status	Shows if the selected trunk is enabled or disabled.
Unit	Specifies a switch unit in the stack (1~4).
Port	Select from 2 ~ 4 ports per trunk.
[Show]	Displays trunk settings, where the first trunk listed
	is specified by “Trunk ID.”
[More]	Scrolls through the list of configured trunks.
[Enable] [Disable]	Enables/disables the selected trunk.
[Add] [Delete]	Adds/deletes the port specified by
	Trunk ID / Member Unit / Member Port.

2-43