| USING THE SYSTEM CONFIGURATION PROGRAM |
Parameter | Description |
Mode | Port security can be set to three states; Static, Disable, |
| or Learning. When set to Static, the switch will drop |
| packets from the port if the source MAC address does |
| not match one of the addresses in the MAC Address list. |
| If set to Learning, the switch will add the source MAC |
| address of all packets received on the port to the |
| authorized MAC Address list. |
[Apply] | Applies a change of Mode to the port. |
MAC | A specific MAC address to be added or deleted from |
| the list. A MAC address must be entered as 12 |
| hexadecimal digits in the format |
| otherwise the entry will not be accepted by the system. |
[Add] | Adds a new MAC address to the current list. |
[Delete] | Removes a MAC address from the current list. |
[Clear] | Clears all the MAC addresses for the current port. |