SMC Networks SMC6924VF manual 3-45, Parameter, Default, Description

		WEB-BASED MANAGEMENT
Parameter	Default	Description
Flow Control	Disabled	Used to enable or disable flow control. Flow
Status		control can eliminate frame loss by
		“blocking” traffic from end stations or
		segments connected directly to the switch
		when its buffers fill. Back pressure is used
		for half duplex and IEEE 802.3x for full
		duplex. Note that flow control should not
		be used if a port is connected to a hub.

Note: VF-45 ports operate at 100 Mbps and support full- and half-duplex mode. 100BASE-FX module ports operate at

100Mbps, full-duplex only. 1000BASE-SX and 1000BASE-LX ports are fixed at 1000 Mbps, but auto-negotiate duplex mode and flow control. 1000BASE-T ports auto-negotiate speed (1000/100/10 Mbps), duplex mode and flow control.

3-45