USING THE SYSTEM CONFIGURATION PROGRAM
IP Connectivity Test (Ping)
Use the IP Connectivity Test to see if another site on the Internet can be reached. The screen shown below is described in the following table.
Network Configuration : IP Connectivity Test (Ping)
===================================================
IP Address | : |
|
|
|
Test Times | : 1 | Interval | : | 3 |
Success | : 0 | Failure | : | 0 |
[Start] |
|
|
|
|
<APPLY> |
| <OK> |
| <CANCEL> |
Use <TAB> or arrow keys to move, other keys | to make changes. | |||
Parameter | Description |
IP Address | IP address of the site you want to ping. |
Test Times | The number of ICMP echo requests to send |
| to the specified site. |
| Range: 1~1000 |
Interval | The interval (in seconds) between pinging |
| the specified site. |
| Range: 1~10 seconds |
Success/Failure | The number of times the specified site has |
| responded or not to pinging. |
