
USING THE SYSTEM CONFIGURATION PROGRAM
Viewing the Current Spanning Tree Information
The Spanning Tree Information screen displays a summary of the STA information for the overall bridge or for a specific port. To make any changes to the parameters for the Spanning Tree, use the Spanning Tree Configuration menu.
Spanning Tree Information : Selection Menu
==========================================
STA Bridge Information ...
STA Port Information ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Displaying the Current Bridge STA
The parameters shown in the following figure and table describe the current Bridge STA Information.
Spanning Tree Information : Bridge STA Information
==================================================
Priority | : | 32768 |
Hello Time (in seconds) | : | 2 |
Max Age (in seconds) | : | 20 |
Forward Delay (in seconds): | 5 | |
Hold Time (in seconds) | : | 1 |
Designated Root | : | 128.0000E800E800 |
Root Cost | : | 501 |
Root Port | : | 1 |
Reconfig Counts | : | 3 |
Topology Up Time | : | 48069 (0 day, 1 hr, 2min, 34 sec) |
<OK>
Use <Tab> or arrow keys to move, <Enter> to select.