USING THE SYSTEM CONFIGURATION PROGRAM
Configuring the Switch
The Device Control menu is used to control a broad range of functions, including port configuration, Spanning Tree, port mirroring, multicast filtering, and Virtual LANs. Each of the setup screens provided by these configuration menus is described in the following sections.
Device Control Menu | ||
=================== | ||
Port Configuration ... | Extended Bridge Configuration ... | |
Port Information ... | 802.1P | Configuration ... |
Spanning Tree Configuration ... | 802.1Q | VLAN Base Information ... |
Spanning Tree Information ... | 802.1Q | VLAN Current Table Information ... |
Mirror Port Configuration ... | 802.1Q | VLAN Static Table Configuration ... |
Port Trunking Configuration ... | 802.1Q | VLAN Port Configuration ... |
IGMP Configuration ... | Port Security Configuration ... | |
BStorm Control Configuration ... Port GARP Configuration ... | ||
| Port GMRP Configuration ... | |
| <OK> | |
Use <TAB> or arrow keys to move. <Enter> to select. | ||
|
|
|
Menu | Description |
Port Configuration | Sets communication parameters for ports. |
Port Information | Displays current port settings and port status. |
Spanning Tree | Configures the switch and its ports to participate |
Configuration | in a local Spanning Tree. |
Spanning Tree | Displays the current Spanning Tree configuration |
Information | for the switch and its ports. |
Mirror Port | Sets the source and target ports for mirroring. |
Configuration |
|
Port Trunking | Specifies ports to group into aggregate trunks. |
Configuration |
|
IGMP Configuration | Configures IGMP multicast filtering. |
