| ||
Parameter | Default | Description |
IP Address | 10.1.0.1 | IP address of the switch you are managing. |
|
| The switch supports SNMP over UDP/IP |
|
| transport protocol. In this environment, all |
|
| systems on the Internet, such as network |
|
| interconnection devices and any PC |
|
| accessing the |
|
| EliteView) are assigned an IP address. Valid |
|
| IP addresses consist of four decimal |
|
| numbers, of 0 to 255, separated by periods. |
|
| Anything outside of this format will not be |
|
| accepted by the configuration program. |
Subnet Mask | 255.255.0.0 | Subnet mask of the switch you have |
|
| selected. This mask identifies the host |
|
| address bits used for routing to specific |
|
| subnets. |
Gateway IP |
| Gateway used to pass trap messages from |
|
| the switch to the management station. Note |
|
| that the gateway must be defined if the |
|
| management station is located in a different |
|
| IP segment. |
MAC Address |
| Physical address of agent module. |
Number of | 4 | Sets the number of concurrent Telnet |
Telnet sessions |
| sessions allowed to access the agent. |
Default: 4 sessions
