USING THE SYSTEM CONFIGURATION PROGRAM
Menu | Description |
Multiple Collision | A count of successfully transmitted frames for |
Frames* | which transmission is inhibited by more than one |
| collision. |
SQE Test Errors* | A count of times that the SQE TEST ERROR |
| message is generated by the PLS sublayer. |
Deferred | A count of frames for which the first transmission |
Transmissions* | attempt on a particular interface is delayed |
| because the medium was busy. |
Late Collisions | The number of times that a collision is detected |
| later than 512 |
| packet. |
Excessive Collisions* | The number of frames for which transmission |
| failed due to excessive collisions. |
Internal Mac | The number of frames for which transmission |
Transmit Errors* | failed due to an internal MAC sublayer transmit |
| error. |
Carrier Sense Errors* | The number of times that the carrier sense |
| condition was lost or never asserted when |
| attempting to transmit a frame. |
Frames Too Long | The number of frames received that exceed the |
| maximum permitted frame size. |
Internal Mac | The number of frames for which reception failed |
Receive Errors* | due to an internal MAC sublayer receive error. |
*The reported values will always be zero because these statistics are not supported by the internal chip set.
Note: Statistics are automatically refreshed every five seconds (see page
