
System Information
Use the System Information screen to display descriptive information about the switch, or for quick system identification as shown in the following figure and table.
Parameter | Description |
System Name* | Name assigned to the switch system. |
IP Address | IP address of the agent you are managing. The agent |
| supports SNMP over UDP/IP transport protocol. In |
| this environment, all systems on the Internet, such as |
| network interconnection devices and any PC |
| accessing the agent (or running EliteView) must have |
| an IP address. Valid IP addresses consist of four |
| decimal numbers, of 0 to 255, separated by periods. |
| Anything outside of this format will not be accepted |
| by the configuration program. |
Object ID | MIB II object identifier for switch’s network |
| management subsystem. |
Location* | Specifies the area or location where the system |
| resides. |
Contact* | Contact person for the system. |
System Up Time | Length of time the current management agent has |
| been running. |
*Maximum string length is 255, but the screen only displays 45 characters. You can use the arrow keys to browse the whole string.