USING THE SYSTEM CONFIGURATION PROGRAM
Menu | Description |
Static Multicast Address | Used to manually configure host MAC |
Table Configuration* | addresses in the multicast table. |
Restart System | Restarts system with options to use POST, or |
| to retain factory defaults, IP settings, or user |
| authentication settings. |
Exit | Exits the configuration program. |
* Not implemented in this firmware release.
System Information Menu
Use the System Information Menu to display a basic description of the switch, including contact information, and hardware/firmware versions.
System Information Menu
=======================
System Information ...
Switch Information ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select
Menu | Description |
System Information | Provides basic system description, including |
| contact information. |
Switch Information | Shows hardware/firmware version numbers, |
| power status, and expansion modules used |
| in the stack. |
