SMC Networks SMC6924VF manual Parameter Description

	USING THE SYSTEM CONFIGURATION PROGRAM
Parameter	Description
FlowControl InUse	Shows the flow control type in use. Flow control
	can eliminate frame loss by “blocking” traffic
	from end stations connected directly to the
	switch. Back pressure is used for half duplex
	and IEEE 802.3x for full duplex. Note that flow
	control should not be used if a port is connected
	to a hub.
Speed and DuplexInUse	Displays the current port speed and duplex
	mode used. (Note that auto-negotiation is not
	available for 100BASE-FX ports.)

2-31