Main Menu
Using the
Menu | Description |
System | Provides basic system description, including contact |
| information. |
Switch | Shows hardware/firmware version numbers, power status, |
| and expansion modules in use. |
IP | Includes boot state, IP address, and the maximum number of |
| Telnet sessions allowed. |
SNMP | Configures communities, trap managers; and activates traps. |
Security | Sets password for system access. |
Upgrade | Downloads new version of firmware to update your system. |
Configure | Saves the switch configuration to a file on a TFTP server. |
Address | Provides full listing of unicast addresses, sorted by address or |
Table | VLAN. |
STA | Enables Spanning Tree Algorithm; also sets parameters for |
| switch priority, hello time, maximum message age, and |
| forward delay; as well as port priority and path cost. |
Bridge | Displays/configures extended bridge capabilities for this |
Extension | switch, including for traffic classes and VLAN extensions. |
Priority | Configures default port priorities and displays queue |
| assignments. |
VLAN | Configures VLAN group members and other |
| VLAN settings. |
IGMP | Configures IGMP multicast filtering. |
Port | Enables any port, sets communication mode to auto- |
| negotiation, full duplex or half duplex, enables/disables flow |
| control, configures broadcast control and port security. |
Mirror | Sets the source and target ports for mirroring. |
Trunk | Specifies ports to group into aggregate trunks. |
Statistics | Displays statistics on network traffic passing through the |
| selected port. |
