
USING THE SYSTEM CONFIGURATION PROGRAM
Configuring Broadcast Storm Control
Use the Broadcast Storm Control Configuration screen to enable broadcast storm control for any port on the switch, as shown below.
Broadcast Storm Control Configuration : Unit 1 Port 1 - 12
======================================
Broadcast control on all ports : | [Enable] [Disable] | |
Port | Threshold | Broadcast Control |
1 | 500 | ENABLED |
2 | 500 | ENABLED |
3 | 500 | ENABLED |
4 | 500 | ENABLED |
5 | 500 | ENABLED |
6 | 500 | ENABLED |
7 | 500 | ENABLED |
8 | 500 | ENABLED |
9 | 500 | ENABLED |
10 | 500 | ENABLED |
11 | 500 | ENABLED |
12 | 500 | ENABLED |
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE> Use <TAB> or arrow keys to move. <Enter> to select
Parameter | Description |
Broadcast control on | Allows you to enable/disable broadcast storm |
all ports | control for all ports on the switch. |
Threshold | The |
| broadcast control will be employed on the port. |
| (Default is 500 pps.) |
Broadcast Control | Enables/disables broadcast control for the port. |
| When enabled, the switch will employ a broadcast- |
| control mechanism if the |
| threshold is exceeded. This mechanism limits the |
| amount of broadcasts passed by the port to half of |
| the received |
| mechanism remains in effect until the number of |
| received broadcasts falls back below the |
| |
| (Default is Enabled.) |