VLAN Port Configuration
Use this screen to configure
Parameter | Description |
PVID | The VLAN ID assigned to untagged frames received |
| on this port. Use the PVID to assign ports to the same |
| untagged VLAN. |
Acceptable Frame | This switch accepts “All” frame types, including VLAN |
Type | tagged or VLAN untagged frames. Note that all VLAN |
| untagged frames received on this port are assigned to |
| the PVID for this port. |
Ingress Filtering | If set to “True,” incoming frames for VLANs which do |
| not include this port in their member set will be |
| discarded at the inbound port. |
GVRP Status* | Enables or disables GVRP for this port. When |
| disabled, any GVRP packets received on this port will |
| be discarded and no GVRP registrations will be |
| propagated from other ports. |
| Note that GVRP must be enabled for the switch |
| before this setting to take effect. (See “Configuring |
| Bridge MIB Extensions” on page |
GVRP Failed | The total number of failed GVRP registrations, for any |
Registrations* | reason, on this port. |
