SMC Networks SMC6924VF manual Displaying Port Statistics, 2-63

USING THE SYSTEM CONFIGURATION PROGRAM

Displaying Port Statistics

Port Statistics display key statistics from the Ethernet-like MIB for each port. Error statistics on the traffic passing through each port are displayed. This information can be used to identify potential problems with the switch (such as a faulty port or unusually heavy loading). The values displayed have been accumulated since the last system reboot.

Select the required port. The statistics displayed are indicated in the following figure and table.

	Port Statistics : Unit 1 Port				1
	===============
Ether Like Counter:
Alignment Errors		:0	Late Collisions			:9
FCS Errors		:0	Excessive Collisions			:0
Single Collision Frames		:0	Internal Mac Transmit Errors			:0
Multiple Collision Frames :0			Carrier Sense Errors			:0
SQE Test Errors		:0	Frames Too Long			:0
Deferred Transmissions		:0	Internal Mac Receive Errors			:0
[Refresh Statistics]				Show port		: 1
[Reset Counters]					[Show]
<OK>	<PREV UNIT>	<NEXT UNIT>		<PREV PORT>	<NEXT PORT>
Use <TAB> or arrow keys			to move. <Enter> to select.

Menu	Description
Alignment Errors	The number of alignment errors
	(mis-synchronized data packets).
FCS Errors	The number of frames received that are an integral
	number of octets in length but do not pass the FCS
	check.
Single Collision	The number of successfully transmitted frames for
Frames*	which transmission is inhibited by exactly one
	collision.

2-63