| USING THE SYSTEM CONFIGURATION PROGRAM |
Parameter | Description |
Forbidden Egress Ports | Prevents a port from being automatically added to |
| this VLAN via GVRP. Note that GVRP is not |
| supported in the current firmware release. |
Untagged Ports | You can add a port to the displayed VLAN as an |
| untagged port by setting this field to “1” or as a |
| tagged port by setting it to “0.” This field is only |
| enabled if the corresponding port has been added |
| to the displayed VLAN as an “Egress Port.” |
[Show] | Displays settings for the specified VLAN. |
[More] | Displays consecutively numbered VLANs. |
[New] | Sets up the screen for configuring a new VLAN. |
For example, the following screen displays settings for VLAN 2, which includes tagged ports
|
| 802.1Q VLAN Static Table Configuration | ||
|
| ====================================== | ||
|
| VID | VLAN Name | Status |
|
| |||
|
| 2 |
| Active |
Unit | Egress Ports |
| Forbidden Egress Ports | |
1. | 111111000000 000000000000 | 000000010000 000000000000 | ||
2. | ||||
3. | ||||
4. | ||||
Unit | Untagged Ports |
|
| |
1. | 111111000000 000000000000 | VID : 2 | ||
2. | [Show] | |||
3. | [More] | |||
4. | [New] | |||
|
| <APPLY> | <OK> | <CANCEL> |
Use <TAB> or arrow keys to move, other keys to make changes.
Notes: 1. To allow this switch to participate in a VLAN group that extends beyond this switch, you must add the VLAN ID for the required external groups.
2.If a removed port is no longer assigned to any other group as an untagged port, it will automatically be assigned to VLAN group 1 as untagged.
