Method 1: Automatic Installation
Repeatedly press and release the F2 key after turning on the computer until the Lenovo Rescue System opens, then select Drivers and Application Installation.
Follow the
The system will restart. After the system has restarted, the installation process will continue until it has completed.
Method 2: Manual Installation
In the Windows system, Click Start → All Programs → Lenovo → Lenovo Drivers and Application Installation.
After starting the procedure, install all the drivers and software manually by following the prompts.
Notes:
1.Do not install software which is already installed on the computer.
2.Make sure that the Drivers and Application Installation software has been automatically installed before starting the operating system. The manual installation function can only be used after the software has been installed.
4.3System Setup
System Setup configures the network configuration for the Lenovo Rescue System to ensure your Rescue System can connect to internet. In addition, System Setup sets and manages all passwords for the Lenovo Rescue system.
4.3.1 Launch
Repeatedly press and release the F2 key after turning on the computer until the Lenovo Rescue System opens, then select System Setup.
4.3.2 Network Settings
Depending on the network access mode of the computer, select “ADSL” or “LAN Connection” in the network connection modes.
1.If you select “ADSL” input the user name and password of the ADSL connection.
2.If you select “LAN connection” configure the IP address and proxy server of the LAN.
User Guide 37
