Specifications, Weight net 6.8 kg, 15 lb | Rotel RB-951MkII instruction

Specifications

Continuous Power Output Stereo Mode (20-20 kHz, < 0.03% THD)

50 watts/ch into 8 ohms

Continuous Power Output Bridged Mono Mode (20-20 kHz, < 0.1% THD)

150 watts/ch into 8 ohms

Total Harmonic Distortion (20Hz-20kHz, 8 ohms)

< 0.03%

Intermodulation Distortion

(60 Hz : 7 kHz, 4:1)

< 0.03%

Frequency Response (±1 dB) 15Hz-100kHz

Damping Factor (20-20,000 Hz, 8 ohms) 280

Speaker Impedance (combined load) Stereo mode: 4 ohms minimum

Bridged Mono mode: 8 ohms minimum

Parallel Mono mode: 2 ohms minimum

Signal to Noise Ratio (IHF A network) 116 dB

Input Impedance

32 k Ohms

Input Sensitivity

1.5volt (low setting) 0.775 volt (high setting)

Auto Turn On Threshold Level (if activated) 10 mV input signal

Auto Turn Off Delay Time (if activated) 5 minutes with no signal

Power Requirements

USA: 115 Volts, 60 Hz

Europe: 230 Volts, 50 Hz

Power Consumption

200 Watts

Dimensions (W x H x D) 440 x 92 x 334 mm

173/8 x 35/8 x 131/4 in

All specifications are accurate at the time of printing.

Rotel reserves the right to make improvements without notice.