140
Specification
Others
Power requirement during operation
29W
Power requirement at standby
2.6W or below (Eco mode: off)
0.7W or below (Eco mode: on)
Power supply
120V AC, 60 Hz
Mass
4.2kg
External dimension
Width 430 x Height 78 x Depth 325mm
Incoming channels
TV: 2-69CH, CATV:1-125CH
Antenna input/output terminal
VHF/UHF: 75, F Connector
Demodulation input/output terminal
0.67Vp-p (75) Unbalanced, Pin jack
Signal system
Standard NTSC Color TV system
Laser
Semiconductor laser, Wavelength: 650nm/780nm
Format
DVD-VR format
DVD-Video format
Image recording system
MPEG2
Sound recording system
Dolby digital M1, M2, Linear PCM
Disc for recording images
DVD-RAM disc (4.7GB for one side, 9.4GB for both
sides)
DVD-RW disc (4.7GB for one side)
DVD-R disc (4.7GB for one side)
Image input
1.0Vp-p (75), Synchronization negative,
Pin jack x 2 systems, 2 at rear, 1 in front
Image output
1.0Vp-p (75), Synchronization negative,
Pin jack x 2 systems, 2 at rear
S Image input
(Y) 1.0Vp-p (75), Synchronization negative,
Mini DIN4 Pin x 3 systems
(C) 0.286Vp-p (75), 2 at rear, 1 in front
S Image output
(Y) 1.0Vp-p (75), Synchronization negative,
Mini DIN4 Pin x 2 systems
(C) 0.286Vp-p (75), 2 at rear
Component image output (Y, PB, PR)
Y output (green), 1.0Vp-p (75),
Synchronization negative, Pin jack x 1 system
PB, PR output (blue, red), 0.7Vp-p (75),
Pin jack x 1 system each
Sound input
2.0V (rms), 50k or below, pin jack
(L, R) x 3 systems
2 at rear, 1 in front
Sound output
2.0V (rms), 200 or above, pin jack
(L, R) x 2 systems
2 at rear
Sound output (bit stream/PCM optical
terminal)
Optical connector x 1 system
Sound output (bit stream/PCM coaxial
terminal)
0.5Vp-p (75), pin jack x 1 system
DV input
4-pin x 1 in front