Toshiba D-R1SU owner manual 110, Editing DV Recording Recording from a digital video camera

Editing

DV Recording (Recording from a digital video camera) (Continued)

Notes

•The DV terminal of this recorder supports only input from a DV format digital video camera. It cannot output to a connected device. Some models of DV format digital video cameras may be not compatible.

•At step 5, you can enlarge a thumbnail by selecting “Full Display”, then pressing the ENTER button.

•If “DV Chapter Create” is set to “Off” and you record onto a DVD-R/RW disc, chapters are automatically made

according to the “DVD-Video: CHP Create” setting

( page 130). The number of chapters has the limit. Chapters are divided with a margin of about 0.5 second or less according to the DVD-Video standard.

•DV recording does not start in the following cases:

-While recording or in the time slip mode.

-While operating a REC MENU, CONTENT MENU or

LIBRARY MENU.

-If the recorder’s clock is not set yet.

-Within 5 minutes before a programmed recording starts, or

during a programmed recording is being executed.

•If a DV recording overlaps with a programmed recording, the DV recording will stop 5 minutes before the programmed recording starts, and the programmed recording will be executed.

•DV recording does not work if the DV terminal is connected equipment other than DV format digital video camera, such as a PC.

•Depending on the connected DV format digital video camera, the display at step 5 may not show “Manufacturer” or “Equipment”.

•If the DV terminal is connected more than one DV format digital video camera, DV recording may not work properly. For proper functioning of DV recording, connect only one device to the DV terminal.

•Keep the DV terminal not connected unless you record from a DV format digital video camera, as it may give influence on the recorder if operated.

•If you start a recording and do not operate for about 15

minutes, the display switches to the full mode, when

“Screen Protector” ( page 127) is set to “On.” Pressing the ENTER button while “Detail Display” is selected can restore the previous display.

•“DV Chapter Create” is not available when recording to a DVD-RAM disc.

•To record stereo sound from the connected DV format digital video camera, connect it to the INPUT 1 jacks using compatible cables such as supplied audio/video cables.

•To record stereo sound from the connected DV format digital video camera, connect it to the input jacks using

compatible cables such as supplied audio and video

cables. ( page 36)

•If a DV format digital video camera is not recognized, pull out the plug and connect it again.

•Some models of DV format digital video cameras may support a different compression format. From such equipment, recording is not possible.

•Depending on the models of DV format digital video cameras, recording may not work properly or some functions may be disabled.

•On an input source from a DV tape which is partly recorded over, “DV Chapter Create” may not work properly.

110