Note on recording on a DVD-R disc

Confirm disc compatibility and prepare an available DVD-R disc to record on ( page 6, 9).

To play a DVD-R disc recorded on this recorder on other devices, finalize the DVD-R disc on this recorder. ( page 106)

The finalization permanently disables the disc’s rewritability. (Canceling the finalization is not possible.)

DVD-Video finalize process cannot be canceled if once executed on a DVD-R disc.

On DVD-R discs recorded on other devices, you cannot execute DVD-Video finalize process or add recordings on this recorder.

To check space remaining on a disc

1)Press the REMAIN button.

The current capacity is displayed at the bottom of the screen and on the front panel display.

2)After checking the capacity, press the button again to turn off the display.

Note

You can also check the capacity of the disc by selecting

“Disc Budget Calculation” from the Quick Menu on the

REC MENU ( page 45).

Programmed recording and operational status The recorder gives priority to programmed recordings in every operating mode. Even if the recorder is playing, recording or editing, or even in standby mode, at a starting time of a programmed recording the recorder will make itself ready or stop those operations and start the recording.

When the programmed settings overlap

Before the first recording is completed, the second program is scheduled to begin recording. When using a DVD-RAM disc, the recording of the previous program stops 15 seconds before the next program starts.

When using a DVD-R or DVD-RW disc, the recording of the previous program stops about 2 minutes before the next program starts, to complete data process. In this 2 minutes, you cannot operate the loaded DVD-R or DVD-RW disc.

On a programmed recording across the change- over of Daylight-saving time

When the clock gains across Daylight-saving time during a programmed recording, it means that the recording completion time is consequently set one- hour earlier. In this case, set the programmed recording one-hour longer in advance. If not set accordingly, the programmed recording stops one- hour shorter.

When the clock loses across Daylight-saving time during a programmed recording, it means that the recording completion time is consequently set one- hour later. In this case, as the programmed recording continues one-hour longer, delete unnecessary chapters by chapter dividing after the completion of recording.

Introduction RecordingPlayback

Editing

Library

Notes

The “Loading” icon appears in the top right of the screen after recording. This indicates that the unit is executing the final recording process (writing managing information). Operations other than changing channels cannot be done until this icon disappears. The time for executing this process differs depending on the recording time or capacity of the disc.

Note that all recording content may be deleted if the unit is disconnected from a wall outlet, or a power failure occurs, during recording.

If a power failure occurs within five minutes prior to the programed recording start time, the programmed recording may not be executed.

A programmed recording may not be executed correctly if scheduled when Daylight-Saving time starts or ends.

Function setup Others

27

Page 27
Image 27
Toshiba D-R1SU To check space remaining on a disc Press the Remain button, Introduction RecordingPlayback Editing Library