Toshiba D-R1SU owner manual Recording Programming a recording REC Menu Remaining volume

Recording

Programming a recording (REC MENU) (Continued)

Remaining volume			Notes
1) Press the REC MENU button.			• When a Reservation disc is inserted in the recorder
			( page 48), you cannot check the remaining volume of
The REC MENU appears.
			other discs.
2) Press the QUICK MENU button.			• The nearest 8 programs are calculated at a time.
The Quick Menu appears.			• While the recorder is preparing for or executing a
			programmed recording, any program modification cannot
3) Press the	/	buttons to select “Disc Budget	be registered.
Calculation” then press the ENTER button.			• Available disc volume is not displayed for a DVD-R/RW
The Disc Budget Calculation menu appears.			disc on which DVD-Video finalize process was executed.
4) Press the	/	buttons to select a timer
program, then press the ENTER button or press
the ADJUST button.
The recorder calculates on a bar graph how much				To stop a programmed recording
a specific program (identified by a check mark) will				To finish,
occupy on the disc.				Press the	button on the front panel twice.
Pressing the ADJUST button can display or remove				When you press it once, a message appears. While

the check mark.	the message is displayed, press the	button once
	again.

e.g.
MENUREC Disc Budget Calculation									7/8 (Tu)		21:00
	CH	Date		Start		End	Media	Mode Rate		Audio Result
	3	7/8(Tue)		11:30 – 11:50			DVD	MN	6. 0	D/M2
	10	7/9(Wed)		21:30 – 22:00			DVD	MN	6. 0	D/M2
	42	7/11(Fri)		22:30 – 23:30			DVD	LP	2. 2	D/M1
	4	7/12(Sat)		20:30 – 23:30			DVD	SP	4. 4	D/M2
HDDDV	Elapsed			(	) Selected(current)			Available		DVD
	Select		Return			Adjust		Revise List REC-MENUEnd

Selected entry Available disc volume

When the entry item is marked X, the recording does not end. Change the setting.

5)Correct the parameters of the timer program if necessary.

(Skip to step 7 if you do not need this.) You can change “Mode”, “Rate”, and “Audio”.

Select an item you want to modify and press the ENTER button. The item will be ready to be altered. Press the ADJUST button to modify. When complete, press the ENTER button.

6)Press the button.

Program modification is registered.

7)Press the REC MENU button to exit the GUI.

To pause recording,

Press the button on the front panel.

To resume recording, press it again.

Turning the power off automatically after completing a programmed recording

1)While executing a programmed recording, press the QUICK MENU button.

The Quick Menu appears.

2)Press the / buttons to select “Auto Power Off” then press the ENTER button.

Keeping the power on even after the programmed recording finished

If the recorder turns itself on to execute a programmed recording, it will turn itself off after finishing the recording. You can restrict this and keep the recorder powered on.

1)While executing a programmed recording, press the QUICK MENU button.

2)Press the / buttons to select “Continue Power On” then press the ENTER button.

44