Shifting a time period of a recording (Time Shift)

If a prior TV program extends beyond its scheduled time and into one that you programmed, you can shift the programmed start and end time of the recording.

e.g.

21:00

21:54

 

 

 

 

Time Shift

20 minutes extend

21:2022:14

1)Press the REC MENU button. The REC MENU appears.

2)Press the / buttons to select a timer program you want to shift the time period.

3)Open the lid of the remote control and press the EXTEND button.

“Start Time” and “End Time” are ready to be input.

4)Press the EXTEND button repeatedly.

Each time you press the button, “Start Time” and “End Time” is shifted in 10 minutes intervals to, up to 60 minutes later.

5)Press the ENTER button.

6)Press the REC MENU button to exit.

Note

After having shifted the time of a timer program which will be repeated daily or weekly, restore the time if necessary.

Adding a timer program

1)Press the REC MENU button. The REC MENU appears.

2)Press the button to select a blank line, then press the ENTER button.

3)Press the / buttons to select the item, then press the ADJUST button to set the item.

4)When complete, press the ENTER button.

5)Press the REC MENU button to exit.

Note

While the recorder is preparing for or executing a programmed recording, you cannot add a timer program which will start within 5 minutes and 15 seconds from the current time.

Deleting a timer program

1)Press the REC MENU button. The REC MENU appears.

2)Press the / buttons to select a timer program you want to delete.

3)Press the QUICK MENU button. The Quick Menu appears.

4)Press the / buttons to select “Program Cancel”, then press the ENTER button.

Check the message, then delete the entry.

5)Press the REC MENU button to exit.

Note

You cannot delete a timer program while another is executed.

Correcting a timer program

1)Press the REC MENU button. The REC MENU appears.

2)Press the / buttons to select a timer program you want to change, then press the ENTER button.

3)Press the / button to select an item, then press the ADJUST button to set the item.

4)Press the ENTER button. The modification is registered.

5)Press the REC MENU button to exit.

Important

You cannot correct a timer program within 5 minutes before the recording start time. You can only delete the timer program.

Note

You can program a timer recording whose start time has already passed, unless the other program recording will start within 5 minutes. A portion of the program before the recording starts cannot be saved.

Introduction RecordingPlayback

Editing

Library Function setup Others

43

Page 43
Image 43
Toshiba D-R1SU Shifting a time period of a recording Time Shift, Adding a timer program, Deleting a timer program