Toshiba E-STUDIO207, E-Studio167, e-Studio237 manual Weekly Timer Setting

5 CHANGING EQUIPMENT’S SETTINGS

Weekly Timer Setting

This section describes how to set the weekly timer. Use the weekly timer to set the equipment to enter the sleep mode automatically at the specified time. You can set the equipment to enter the stand-by status when the office hour starts, and to enter the sleep mode when the office hour ends. The time can be set for each day of the week.

yIf the equipment is in the energy saving mode at the time when the weekly timer is set to turn the power OFF, it does not become ready status at the time when the weekly timer is set to turn the power ON. In this case, make the equipment in the ready status by following the pro- cedure below.

-Press the [ENERGY SAVER] button.

-Open the Platen Cover (optional) or Reversing Automatic Document Feeder (optional) / Automatic Document Feeder (optional).

-Connect the equipment to a PC with a USB cable.

yIf the power of the equipment is turned OFF, the weekly timer function does not work.

When the Fax Kit (optional) is used, it is recommended to use this function for the energy sav- ing.

1 Press the [USER FUNCTIONS] button.

The “user functions mode” main screen is displayed.

2 Select “DEFAULT SETTINGS” with and buttons, and then press the [ENTER] button.

USER FUNCTIONS 1216

01.DEFAULT SETTINGS

02.LISTS 03.INITIAL SETUP

132 Weekly Timer Setting