Toshiba E-STUDIO207, E-Studio167, e-Studio237 manual Preparation 3 Registering Size of Paper Placed

1 PREPARATION

Preparation 3 - Registering Size of Paper Placed

When you place paper in a drawer for the first time or when you place paper whose size is differ- ent from that of the paper which has been placed in the drawer, the new paper size needs to be registered into the equipment.

Registration of standard sizes (LD, LT, LT-R, LG, ST-R) differs from that of standard sizes other than these.

yThe paper size can also be registered on the “user functions mode” main screen. P.123 “Paper Size Setting”

yThe registration menu for the paper size can be displayed automatically whenever the drawer is closed. This is useful when paper in the drawer is often replaced.

P.163 “Pop-Up Display Setting”

Registering standard size (LD, LT, LT-R, LG, ST-R)

In this section, LT size is registered in the drawer of the equipment as an example.

1 Press and hold the [COPY] and [DRAWER] buttons simultaneously for more than two seconds.

The LCD screen shows as follows:

Select paper size

100% NONSORT ZOOM FINISHING

1

EDIT

2 Press the [DRAWER] button several times until the lamp of the drawer in which you placed paper is lit.

48 Preparation 3 - Registering Size of Paper Placed