Toshiba e-Studio237, E-Studio167 manual Preparation 2 Placing Copy Paper, Acceptable media types

1 PREPARATION

Preparation 2 - Placing Copy Paper

Place copy paper in an appropriate paper source before you start copying.

Acceptable media types

Acceptable media types differ depending on its paper source. See the table below for the details.

Feeder	Media type	Paper size	Maximum sheet
			capacity *1
Drawers of	Plain paper	LT format:	250 sheets
the equip-	(17 - 20 lb. Bond)	LD, LG, LT, LT-R, COMP, 13"LG	(17 lb. Bond)
ment and		A/B format:	250 sheets
Paper Feed		A3, A4, A4-R, B4, B5, B5-R, FOLIO	(20 lb. Bond)
Unit
(optional)
Drawers of	Plain paper	LT format:	550 sheets
the Paper	(17 - 20 lb. Bond)	LD, LG, LT, LT-R, ST-R, COMP, 13"LG	(17 lb. Bond)
Feed Ped-		A/B format:	550 sheets
estal		A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO	(20 lb. Bond)
(optional)
Bypass tray	Plain paper	LT format:	100 sheets
	(17 - 20 lb. Bond)*2	LD, LG, LT, LT-R, ST-R, COMP, 13"LG	(17 lb. Bond)
		A/B format:	100 sheets
		A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO	(20 lb. Bond)
	THICK PAPER 1		1 sheet
	(21 - 28 lb. Bond)*3		(21 - 28 lb. Bond)
	THICK PAPER 2		1 sheet
	(29 lb. Bond - 90 lb.		(29 lb. Bond - 90
	Index)*3		lb. Index)
	Tracing paper		1 sheet
	(20 lb.)*3
	Sticker labels*3		1 sheet
	Transparencies*3, *4	LT only	1 sheet

*1 “Maximum sheet capacity” refers to the maximum number of sheets when TOSHIBA-recommended paper is used. See the following page for the TOSHIBA-recommended paper:

P.39 “Recommended paper”

*2 The paper of 13 to 16 lb. Bond can be used if it is set on the bypass tray one by one.

*3 Automatic duplex copying is not available.

*4 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.

You cannot mix various paper sizes in one drawer.

Abbreviations for LT format sizes:

LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer

38 Preparation 2 - Placing Copy Paper